Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Discussions about Other Fine Doubles (https://parkerguns.org/forums/forumdisplay.php?f=20)
-   -   Ithaca 4E 16 Gauge (https://parkerguns.org/forums/showthread.php?t=13948)

Larry Stauch 07-19-2014 05:11 PM

Ithaca 4E 16 Gauge
 
10 Attachment(s)
At a recent auction I found this 16 gauge Ithaca 4E with 32" ventilated ribbed barrels and a single selective trigger. It will need new wood because someone tried to replace the wood, but needed a little more skill and experience. And as you can see one of the ejectors isn't working properly. But, I love it!
The good news is this gun will powder a target at 40-50 yards with the standard 1 ounce factory loads. It was made in 1927 and there were a total of 560 4Es made including 24 total 410 and 28 gauges; that leaves 536 10s, 12s, 16s and 20s so I don't think there were too many 16s with 32" barrels, let alone vent ribs. Unfortunately, the Ithaca book does not go into that detail.:cheers:

David Lien 07-19-2014 06:17 PM

Lucky you. I do like your gun…
David

Dave Noreen 07-19-2014 06:40 PM

Great gun!! Congrats.!! I've got a 16-gauge NID No. 4E, but the only 16-gauge NID with a vent rib I recall off hand ever seeing was Chas. Askins' No. 5E that Elmer Keith had and wrote about for years.

http://img.photobucket.com/albums/v3...s01c75def.jpeg

A flyer introducing the NID showing a vent rib No. 4 --

http://img.photobucket.com/albums/v3...NIDFlyer02.jpg

You might want to post your pictures and info here on Shotgunworld --

http://www.shotgunworld.com/bbs/view...ccb7a8b2d494f5

and see if Walter Snyder chimes in with some info on your gun.

charlie cleveland 07-19-2014 08:51 PM

thats a mighty nice 16 you got there...them 16 s with 32 inch barrels are hard to come by..lucky you...charlie

Larry Stauch 07-20-2014 02:16 PM

Ithaca 5E 20 gauge Vent rib
 
Of course there's always this one that I have been lusting after....

http://members.gunsinternational.com...n_id=100422443

Dave Noreen 07-20-2014 03:53 PM

NID 20-gauges with vent ribs and long barrels are almost common!! Even I have one --

http://img.photobucket.com/albums/v3...geOverview.jpg

http://img.photobucket.com/albums/v3...StockRight.jpg

not so with 16-gauges!!

Larry Stauch 07-20-2014 04:17 PM

20 Gauge NID
 
Now that's a beauty!

Rich Anderson 07-28-2014 11:15 AM

A very nice find Larry congrats:bowdown: Lust is a good thing also:) One of our members had a 4E 20 w/32 inch vent rib barrels but the stock was going to need replacing and it just wasn't an affordable project at the time. A graded small bore Ithaca is one of my dream guns.


All times are GMT -4. The time now is 12:37 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org