PARKER HAMMER DISASSEMBLY INSTUCTIONS
I'M NEW TO PARKER GUNS. I WANT TO REBUILD/REPAIR MY PARKER HAMMER DOUBLEBARREL, 271XX. HAVING TROUBLE WITH DISASSEMBLY, NO GUIDE/PICTURES. HAVING PROBLEM WITH SCREW, NOT SURE WHAT IT'S CALLED: TO REMOVE BOTTOM STOCK MOUNT TO WATER TABLE. SEEMS LIKE A PIN HOLDS THE SCREW IN PLACE. PIN TIGHT/JAMED. HARD PIN, TRIED TO DRILL, BRAKE DRILL BITS. "PLEASE' ANY HELP WOULD BE APPRECIATED? ALSO, SOURCE FOR PARTS: HAMMER, SCREWS, PINS. ???
THNAKS IN AVANCE, SID AUDIFFRED |
Sid,
Take some pictures. What I visualize scares me. The pctures will help us walk you through this. Harry |
Me too Harry--
Sid- slow and steady here. Robin Lewis printed out some good basic directions for dis-assembly of the stock and removal of the floor plate of Parkers- words of wisdom from Robin. Patience, good lighting, a well padded vise and work bench and proper screw drivers and drift punches are needed.
First- what was malfunctioning with your Parker-let's start there, and if you can add pictures- When I read about drilling out pins, etc- Whoa Nellie-- :rolleyes: |
All times are GMT -4. The time now is 02:53 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org