Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Restoration (https://parkerguns.org/forums/forumdisplay.php?f=8)
-   -   Restore or not? (https://parkerguns.org/forums/showthread.php?t=11541)

John Ross 10-02-2013 08:44 AM

Restore or not?
 
Have 12 ga. Trojan 187xxx w/2 bbls - sk/sk 26" beavertail & m/f 30" splinter. Bbls mirror, action tight. Two questions: present value? Worth restoring? Thanks, JR

Rick Losey 10-02-2013 08:59 AM

could you post some pictures?

what is the current condition. Is it a family piece? A full restoration of a 12 bore Trojan may not be cost effective. Value without a gun in hand is difficult, value from a minimal description is impossible

John Ross 10-02-2013 09:09 AM

Restore or not Trojan
 
Rick, Thanks. Gun is mechanically perfect. No case hardening visible on action. Barrels 75% Stock 75% evenly worn. Trumbull lists full restoration for Parker w single set of barrels at $3600. Paid $900 for it. I suspect you're right that a restoration would not generate a good return on investment.

John

John Campbell 10-02-2013 10:29 AM

John:
If BOTH sets of barrels are numbered to this gun, it does have some value. But only if it's not "restored". At 75%, I'd highly recommend that you not touch it. And... if those barrels have the same serial number, you have a RARE collector piece. Few Trojans were made up with two sets of barrels.

John Ross 10-02-2013 10:42 AM

Restore or not
 
Kensal,

No numbers on barrels but numbers on both forearm irons match. Shotgun stays as is.

Many thanks,

John

Brian Dudley 10-02-2013 02:21 PM

Sounds like a good fiscal decision. You should still post pics. Would like to see them.

Dean Romig 10-02-2013 05:09 PM

I would suggest the beavertail forend might not be original and likewise the 26" barrels but you say that the serial number on both forend irons matches so who can say? We would like to see some some good quality pictures.

The serial number should be stamped into the side of the barrel lug. There's got to be a serial number on at least one set of barrels.

Are there any Remington codes on the barrel flats?

Mills Morrison 10-02-2013 05:11 PM

If it works and no issues, it sounds like you got a good buy. Sounds like a great gun to shoot

John Ross 10-02-2013 06:09 PM

Yep. Both sets of barrels have same number. Lovely gun to shoot.

J


All times are GMT -4. The time now is 08:23 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org