Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   10 Gauge Ejector Guns (https://parkerguns.org/forums/showthread.php?t=11210)

Pete Lester 08-23-2013 03:59 PM

Composite barrel 10 Gauge Ejector Guns
 
I am just curious, over the years I have seen some fluid steel 10ga ejector guns, mostly PHE's and a DHE. Ejectors came out in the early 1900's when twist steel 10's and damascus 10's were still being built. Does anyone have or has anyone seen a composite barrel Parker 10ga (Grade 1 and 2 in particular) with ejectors? I suspect they would be quite uncommon.

Bill Murphy 08-23-2013 05:00 PM

Aside from missing stock books, the Serialization Book will tell you exactly how many ten gauge ejector guns were made in various grades. Unfortunately, most of the missing stock books are in the era that would include ejector tens. Give it a shot and get back to us.

Robert Delk 08-23-2013 08:21 PM

I think I saw one in my collection of decoy catalogs.It would have been in the late 80's or early 90's.I'll check and see if I can find it.I remember because there was a 10 VHE with steel barrels about the same time in a different sale.

Dave Suponski 08-24-2013 09:26 AM

A long time friend has a 10 bore VHE with steel barrels. If I remember correctly this gun is one of 3 made.

Pete Lester 08-24-2013 12:03 PM

I have been going through the Serialization Book looking for ejector equipped 10's, looking to find any grade 1 or 2 with composite barrels. I have come to the conclusion an ejector 10 bore is very uncommon.

I found only 13 ejector equipped 10's between 108909 (1902) and 195336 (1921). All but two were grade 3 or higher and only four with composite barrels. I am sure there are some built after this date but 10's were getting few and far between and my eyes tired.

124518 TI4
128627 TI4
128896 D4
129828 D4
135876 D3
155374 TI3
159868 A4
169256 TI3
172577 P2
172578 P2
172579 A4
172580 A4
180446 D3

I did notice another interesting group of guns, ten guns, all 10ga with code DV (Vulcan grade with Damascus Barrels), 173953 to 173962, none of them with ejectors.

Bill Murphy 08-24-2013 12:32 PM

Those ten gauge guns were shipped January 7, 1916 to Iver Johnson Sporting Goods in Boston. The price was $25.00 each. A whole raft of Twist barrel twelve gauges were included on the same order for $22.00 each. These were the Twist barrel Trojans that are so hard to find. Parker Brothers must have been getting rid of composite barrels and making a bulk sale at a discounted price. However, my notes tell me that these are not the cheapest Trojans ever sold by PB. The cheapest I have found were $19.00.

Daryl Middlebrook 08-24-2013 03:22 PM

I have a 10ga. CHE with 36" acme barrels. S/N 191xxx. A 1920 gun on a 3 frame.-----Daryl

Phillip Carr 08-25-2013 12:33 PM

I also a 1920 10 gauge GHE with 36" Special Steel Barrels. S/N 191349 3 inch chambers on a 3 frame.

Dean Romig 08-25-2013 12:44 PM

I have a DHE 1908 Damascus gun with original ejectors 149020

Pete Lester 08-25-2013 02:46 PM

Quote:

Originally Posted by Dean Romig (Post 113555)
I have a DHE 1908 Damascus gun with original ejectors 149020

The Serialization book says that is a D3 28 gauge with 28" tubes. Is it actually a 10ga gun?


All times are GMT -4. The time now is 12:30 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org