Hello, I am new here and am looking for some help
 

I have a 20 Guage Parker, Frame size zero, Serial numbers put it in 1928 manufaturer date, It says parker steel on the barrel, The grade is PH, Barrel weight is 3 (1). There is an additional P stamped below the serial numbers on the water table which has me a bit confused, im curious what the P means. It also has auto ejectors. I am also wondering if there is a parts list or a drawing of the inner workings of the gun. If anyone can help me it would be much appreciated. Thank you

P on the water table is the grade as in PH but since you say yours has ejectors it’s actually a PHE ,

Thank you very much

Go to the Home Page. Check the menu on the left side. Click on technical information. Some of the information you seek is there. Welcome to the site.

Welcome, Julian. When you have a chance, please post pictures of your gun. Sounds interesting.

Thank you, i'll check it out

Thanks for the welcome. I have it apart right now, it's unfortunate but the stock has a crack and i'm trying to figure out what to do. I think the crack may be from oil entering the wood. But it also appears to have four dowels inserted into the stock, so maybe it was broken before? I will send some pictures tomorrow

Hello, here is the link. I didn't know how to post pictures to my thread. https://imgur.com/a/Odc41hy I'm not sure what I am going to do about the wrist. I don't want to sand and refinish, I would like to keep it as orignial as possible.

If I were you, I would put those parts in a bag and send them to someone who knows what they are doing. You have a $5000 or more gun and you can quickly convert it into a $700 gun if you try to fool with it yourself. No more to say.

I put the box lock back together. Upon closer inspection of the stock I noticed that it has four dowels inserted into the stock from a previous break. I unfortunately do not have the access to gunsmith willing to do the work. I can not afford to send the gun out to be repaired.