12ga 3/4 oz test using Cheddite CX2000 Primer
 

I had my 3/4oz 12ga load tested with the Cheddite Primer CX 2000. Here are the test result, I am not recommending the load it is FYI.

Craig, Clay Dot and Clays are very similar. Try 16g Clay Dot in that load if you want more speed. I use 16g Clays in my 7/8 oz practice loads and they smash targets and have very little recoil. They run in the 1160 FPS range so your 3/4 oz should be faster with 16gr.

Thanks for sharing Craig, nice low pressure load.

I load all my 20ga to 1200fps. This seems a very reasonable load for any steel or composite bbl.

I aim for +/-1200 FPS with all my loadings.

1200 sounds good to me....charlie