My First American "Classic" Ithaca NID4E 12Ga.
5 Attachment(s)
I purchased my first American "Classic" SxS this past summer, a 1927 Ithaca NID4E 12Ga. 2bbl set. It came with a set of 30" bbls choke stamped 4/4(F/F) and as et of 24" 0/0(CYL/CYL).
After receiving it from the dealer I purchased it from online I was pleasantly surprised at what arrived and I immediately sent it to Stillwater Restorations for servicing and ended up having a bit of restoration work done to it at Chris's recommendation. While the gun was there being worked on I sent to the Cody Museum to see if I could get a letter for the gun and give me a bit of insight if the gun was ordered as a two bbl set or if the second set was an after thought. As it turned out it was factory ordered as a set. The letter does not give much info on delivery to whomever ordered it but there is a name and partial address. Here are a few pre-restoration pictures.... |
5 Attachment(s)
And a few post restoration pictures...:) Barrels, forend irons and trigger guard were reblued, receiver and top lever were colour case hardened as the original was mostly gone except for a few traces. Wood was untouched as it was not in need of any work.
|
An absolutely stunning set. Looked pretty damn good as it was before restoration. Ithaca always seemed to use great wood on their graded guns.
|
Quote:
|
That is a great looking NID grade 4, thanks for sharing the pictures Frank!
I like the Prince of Whales grip (half pistol). Please do share a picture of the letter! I'm scratching my head as to why the rearward trigger guard screw is covering part of the serial #, does the gun letter as a straight grip originally? Stan |
Quote:
Frank |
5 Attachment(s)
So I went digging around and found an old photo that had come with the gun. As you can see it is straight gripped but I'm certain by the checkering and if memory serves Chris did say the old fellow who had him restock it had a non-original stock on the gun to replace the higher grade stock it had come with that got broken and that the original wore a Prince of Wales grip and he wanted Chris to replicate the original with the proper checkering pattern as well. I took a few photos, as you can see the forend wood serial # matches on both forends so the gun did come with higher grade wood new and the Fleur-De-Lis checkering.
|
1 Attachment(s)
That is a unique 2 barrel set for sure, I don’t recall ever seeing another Ithaca 12 gauge with factory 24” barrels.
I’ve seen a 20 gauge and 28 gauges with 24” barrels. The trigger guard would have had 1 screw which was in the middle of the serial number on the graded NID’s. |
1 Attachment(s)
AS you can clearly see the trigger guard on this one is much longer than the pics you posted and it is the original trigger guard. I have seen pics of a few identical to mine as well and it has two screws to your one. I am guessing due to this gun having been made new with a Prince Of Wales grip as opposed to the standard tight curled pistol grip. It may also explain why the screw goes through the serial#. Maybe the engraving was completed prior to securing the trigger guard to the stock? I am going to contact Chris at Stillwater and ask a few questions. He specializes in restoring antique American SxS's and has a wealth of knowledge.
|
Every pistol grip NID I've saved pictures of has the one screw trigger guard backstrap. Pistol grip Lewis, Minier and Flues Models have two-screw trigger guard backstraps.
|
All times are GMT -4. The time now is 09:05 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org