Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Non-PGCA Shooting Events, Shows, and Conventions (https://parkerguns.org/forums/forumdisplay.php?f=10)
-   -   8th Annual East Coast Fine Arms Show (https://parkerguns.org/forums/showthread.php?t=8807)

Dave Suponski 12-03-2012 03:32 PM

8th Annual East Coast Fine Arms Show
 
8th Annual East Coast Fine Arms Show
Stamford Plaza Hotel
2701 Summer ST.
Stamford,CT 06905
January 5&6 2013
Show hours are Saturday 9-5 Sunday 9-3
The Parker Gun Collectors Assoc. will have 2 display tables at this show both days
Come on by and say hello.....
Contact info: Dave Suponski 203-260-1275

Chuck Bishop 12-03-2012 04:02 PM

Dave,

Check your dates. What you have posted is for Jan of 2012.

Let me know what the new dates are. I may come up again.

Dave Suponski 12-03-2012 04:16 PM

OOPS! I fixed it Chuck...Thanks

Dean Romig 12-03-2012 04:38 PM

Chuck, as part of our display at the East Coast Fine Arms Show it would be great if you could bring several copies of pages from the Parker Bros. books set in a notebook... just for display, not for research.

Dave Suponski 12-29-2012 06:30 PM

Just a reminder for anyone interested....This is next weekend.

Dean Romig 12-29-2012 07:36 PM

We'll have good PGCA representation Dave. I've heard from several saying they'll be there.

George M. Purtill 12-29-2012 08:58 PM

1 Attachment(s)
I will bring some guns.
I will have the Haythe skeet gun that is in the current PP.
I will also bring the George Lane re-checkered DHE's once owned by Lt. Governor Wilcox shown below.

Dean Romig 12-29-2012 09:57 PM

Is that a .410?.... on a 00 Frame??

Dave Suponski 01-06-2013 05:48 PM

3 Attachment(s)
A few pictures from the show.

1) A paying customer,Dean and Allan

2)BH Damascus, AAHE,B grade lifter and a DHE

3) D grade 10 bore,Lam 1 16 gauge lifter,CH Bernard,VHE 28 gauge

I call this years show the D Grade Show. I seems they were everywhere.

George M. Purtill 01-06-2013 05:51 PM

Quote:

Originally Posted by Dean Romig (Post 90879)
Is that a .410?.... on a 00 Frame??

Romeo- OOO frame
The last O is hard to see.

Dave Suponski 01-06-2013 05:52 PM

3 Attachment(s)
A few more
1) Chuck Bishop,Larry Frey and Allan Swanson.
2) Georges wonderful OO frame .410 Note the lack of the flats on the barrels.
3) Dean doing....I have no idea....

edgarspencer 01-06-2013 06:47 PM

I feel compelled to say Thank You to Toolman for the great White Chocolate Chip cookies. The Coyote Collectors table was next to the PGCA tables

Dean Romig 01-06-2013 10:32 PM

George, That is an early .410 and it looks like a 28 ga. frame with the breech balls filed to an appropriate size for a .410. Have you measured the firing pin spacing?

George M. Purtill 01-08-2013 06:36 AM

Quote:

Originally Posted by Dean Romig (Post 91895)
George, That is an early .410 and it looks like a 28 ga. frame with the breech balls filed to an appropriate size for a .410. Have you measured the firing pin spacing?

I can't measure crap with my Walmart level of tooling.
It is the first commercially available 410. The lug says 000.
I am positive the stock book confirms that. Only Chuck Bishop knows for sure. Chuck? 217466

Rich Anderson 01-08-2013 07:52 PM

George those are two very nice shotguns for sure.


All times are GMT -4. The time now is 02:57 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org