Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Shotgun Shell Reloading (https://parkerguns.org/forums/forumdisplay.php?f=21)
-   -   20 Gauge Low Pressure Loads (https://parkerguns.org/forums/showthread.php?t=57)

Tom Carter 05-24-2009 11:10 AM

20 Gauge Low Pressure Loads
 
Does anyone have a low pressure 20 gauge load for Remington or Winchester hulls? Thanks, Tom

Robert Rambler 05-24-2009 03:45 PM

Tom, I have some data for the 20ga, do you any preference on shot weight, wad and primer?

Tom Carter 05-24-2009 04:18 PM

20 gauge low pressure
 
Hi Robert, Tthank you. I'll take any information I can get. My email is tcic@sccc.tv. Cheers, tom

Robert Rambler 05-24-2009 06:50 PM

Tom, Check your Email.

Tom Carter 05-24-2009 08:08 PM

Robert, I got it. Thank you. Cheers, Tom

Pat Dugan 05-30-2009 11:05 AM

I also would like some information on 20 ga low pressure. I shoot a lot of skeet. The 7/8 oz of shot . I shoot mostly winchester AA hulls

Thanks pddugan@bellsouth.net

Pat Dugan

Dave Miles 06-02-2009 07:34 AM

If anyone has a 20 gauge low pressure load using the Remington STS hull, I would love to have it. I have a good low pressure load using the 2-1/2" RST/Cheddite hull. asphaltdave@comcast.net

Robert Rambler 06-02-2009 06:43 PM

Dave, Check your email, R Rambler

Kurt Densmore 09-21-2009 10:11 AM

Would you gentlemen please forward me your low pressure 20 ga loads. I have a twist Ithaca flues that I need to load for and my son won a 20ga single shot Youth Rossi at the DU banquet. I shot a factory Rem shell out of this thing and it pounded the crap out of me. I then tried a RST 7/8oz load and wasn't a whole lot better. A low pressure 7/8oz for the flues and a really low recoil 3/4oz recipie for the boys would be nice.

I don't know how they expect kids to shoot that gun with factory loads. It is even chambered in 3" ....it can't weigh much over 5.5 lbs...:shock:

Thanks for all that respond.

Kurt

Tom Carter 09-21-2009 01:13 PM

Loads
 
Hi Kurt, Send me your email address on a PM and I'll send what I have, which isn't much. Cheers, tom

Eric Grims 09-10-2010 07:12 PM

If you are still sharing that recipe I have a need for both 2 3/4 and 2 1/2 low pressure 20 gauge. I would very much appreciate it. Thanks
email:
gman@sover.net

Rich Anderson 09-11-2010 07:46 AM

Eric-check your E-Mail

Eric Grims 09-11-2010 09:30 AM

THANKS!!!

Bruce Day 09-12-2010 08:29 PM

In 20's I shoot 3/4 oz of shot with a AA clone wad over 12gr Int'l ignited by a Win 209. Runs out to 9000psi and its certainly low recoil. Speed runs about 1150 if I remember right and works fine on targets, quail and dove. The Int'l burns clean. The load is from the Hodgdon manual.

Mark Dube 04-17-2011 03:37 PM

LP 20 gauge recipes
 
Gentlemen, could I bother you for some of those LP 20 gauge loads?

Thanks!

Mark

vintagesxs@live.ca

Robert Rambler 04-17-2011 05:56 PM

Mark, Ck your email. :)

John Dallas 04-17-2011 08:22 PM

17 grains of 800X under 7/8 oz shot.

800 X is very slow burning, (hence, low pressures) but it is dirty.


All times are GMT -4. The time now is 11:57 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org