![]() |
PB
Breaking one of my own rules, I loaned an old manual to a friend, who now "can't find it'.
I'm nearing the end of my stash of 7625, which was the only powder I used in 16ga Cheddite, 2 1/2", 7/8oz loading, but have enough PB for the foreseeable future. If you have a good PB 16ga load, using SG16 wads, could you share it with me? I have been trying 572, in place of 20/28 in both 20ga and 28ga, but find it pretty dirty. |
Do you by chance have SR4756 in any abundance ? When I got the overabundance of the WIN AA type 16 gauge hulls I got a bunch of 4756 in the deal which was what this fellow used and it worked darn well . Also used the SP-16 wad in his instructions .
|
Quote:
|
Quote:
|
Quote:
|
ahem. Back to that PB, of which I have 2 Five pounders. It was perfect in low pressure 20 and 12, so there's gotta be a sweet spot for 16 too. I've never needed to try 4756 in the past. I'll keep that card in my back pocket for now.
|
Quote:
|
Edger, I had these loads tested by Tom Armburst in 2014
http://www.16ga.com/forum/viewtopic....ghlight=tested |
Thank you, Mark. Just what I was looking for.
|
Thanks for the posting Mark. Nice loads.
|
Edgar, I have a 28g load for PB too if you're interested. Very soft shooting.
|
:corn::corn:
Quote:
|
Quote:
|
I have been using Marks data for about 5 or 6 years which he shared. Its an excellent load using Cheddite 2 1/2" hulls, PB powder, and 7/8 lead. I have used this for sporting clays, dove, and pheasants. It works!
I inherited quite a bit of PB when my brother passed, and I think I still have about 25lbs. left. It is an excellent powder for 16 gauge and a number of pistol loads. I Thing you will like it. Byron |
2 3/4" 28g Cheddite and Fiocchi hulls and proper wads with 3/4 oz lead will take 14g PB. Remington STS hulls and proper wads with 3/4 oz lead will take 12g PB.
|
All times are GMT -4. The time now is 09:20 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org