![]() |
Stock loose from received
Just got back from a short hunt and noticed the stock on my 12 gauge Trojan is shockingly loose from the receiver. I know there isn’t a long bolt going through the entire stock behind the butt plate, was wondering what to check to see if I can tighten her back up. There’s no cracks or chips anywhere, seemed to have just loosened up.
|
Likely it is cracked internally.
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
1 Attachment(s)
Here is a picture where the separation occurs.
|
Cracked I would say if there Sorry What shells were you using or could be just bad luck
|
Quote:
|
Yes. The head is split. This happens from the gun being dropped, fallen on or bangs around. Normal Shooting will not usually cause it. It is something that is easily and invisibly repaired. Not by putting a bolt through the head like many in the past have done.
|
Quote:
|
Quote:
|
Dremel tool, staple or threaded rod and some Acra-glass or your favorite epoxy. Make sure you follow stock removal instruction from the website very carefully.
|
1 Attachment(s)
Quote:
|
David, ship the gun to Brian. He will correctly fix it and his work is exceptional.
|
All times are GMT -4. The time now is 05:08 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org