Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Gunsmith and parts? (https://parkerguns.org/forums/showthread.php?t=38631)

NateHawley

02-28-2023 12:00 PM

Gunsmith and parts?

5 Attachment(s)

Alright guys, I've had this in the safe for a little while now. I'm looking to get it back into working order. I got the gun as it is in the pictures missing the trigger plate screws and what ever other parts aren't seen as well as the safety. Does anyone know of a gunsmith or someone that might have the parts or a place to start to try and get this fixed? Really what to get this pack to working order so I can hunt it.

Nate

Joe Dreisch

02-28-2023 12:02 PM

What frame size is it?

NateHawley

02-28-2023 12:16 PM

Quote:

Originally Posted by Joe Dreisch (Post 383667)

What frame size is it?

It is a size 2

Joe Dreisch

02-28-2023 01:34 PM

Brian Dudley sells new screws for the floorplate but they need fitting, final slotting and proper finish. He usually has a fair supply of parts. Send him a PM and he will let you know if he can help you. He stays busy and is very talented but, without a doubt, the quality of his work is top notch.

Destry L. Hoffard

02-28-2023 06:46 PM

Is this all you have of the gun?

Bob Hayes

02-28-2023 07:16 PM

Dudley

CraigThompson

02-28-2023 08:31 PM

Over the last several years I’ve gotten quite a few parts from Dudley with quick turn around .

Frank Kernan

03-01-2023 11:56 AM

Try here:
https://www.gunpartscorp.com/gun-man...ammerless-park
Numrich does have parts at times the above address is for the illustration, click on the dropdown for the part if you see it and it will let you know if they have it.

Destry L. Hoffard

03-01-2023 12:01 PM

Is this all of the gun you have?

NateHawley

03-01-2023 01:27 PM

Quote:

Originally Posted by Destry L. Hoffard (Post 383772)

Is this all of the gun you have?

I have the, stocks, barrel and reciever, just missing the parts in the reciever

allen newell

03-01-2023 04:11 PM

1. Brian Dudley
2. Lawrence DelGrego

Mark Britton

03-01-2023 09:23 PM

Dudley will only tell you the truth fix your receiver and get it back to you. Don't fool with him. Find someone who will jerk you around !

Thomas L. Benson Sr.

03-16-2023 10:54 AM

Were you able to find your parts. If not I may have what you need. Thomas

edgarspencer

03-16-2023 05:29 PM

Sears and cocking slide is currently listed on ebay. Not sure about the sear pin. There is a trigger plate with screws also. Sears would require fitting, or maybe you'll get lucky.

todd allen

03-16-2023 07:49 PM

Quote:

Originally Posted by Mark Britton (Post 383808)

Dudley will only tell you the truth fix your receiver and get it back to you. Don't fool with him. Find someone who will jerk you around !

And the funny dry humor award goes to, . . .

Mike Koneski

03-17-2023 08:17 AM

Quote:

Originally Posted by Mark Britton (Post 383808)

Dudley will only tell you the truth fix your receiver and get it back to you. Don't fool with him. Find someone who will jerk you around !

Laughed so hard I just about spit out my coffee!! :rotf::rotf:

Thomas L. Benson Sr.

03-19-2023 01:31 PM

Nate: Were you able to find your parts? Thomas

Paul Nelson

12-31-2024 10:23 AM

Parker hammerless safety slide spring

Good morning and thank you for the add! I am working on a hammerless parker 12-gauge side by side and I'm looking for a safety slide spring. I also wouldn't mind trying to make one if anyone has any dimensions I could use. Thank you, Paul

allen newell

12-31-2024 06:50 PM

Go with Brian Dudley

All times are GMT -4. The time now is 12:28 PM.