Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   Serial number look up (https://parkerguns.org/forums/showthread.php?t=3134)

Scott Janowski 12-31-2010 10:26 AM

Serial number look up
 
Can someone look up 236351 for me?
Thanks, Scott

Josh Loewensteiner 12-31-2010 10:33 AM

V grade 12ga 26" straight stocked with ejectors, single trigger and large forearm according to the serialization book

scott kittredge 12-31-2010 10:37 AM

vhe,str. grip 12 ga 26 in bbls,single trigger,large forearm. nice sounding gun. sounds like one of them skeet guns. does it have skeet in/skeet out on barrel flats? what kind of butt ? ck, dhbp.or pad

Scott Janowski 12-31-2010 10:47 AM

Well...It has been refinished and it is now a pistol grip gun with a Dogs Head buttplate, it is still a 26" gun and has the beavertail, single trigger, ejectors. The barrels will not come off (hook must be stuck) so I can not see the flats very well. This answers why there is no serial number on the trigger guard though. It looks like a Del Grego refinish. Thank you! Scott

scott kittredge 12-31-2010 01:55 PM

try dry firing it and than taking of forend than barrels should come off.:corn:

Rich Anderson 12-31-2010 02:49 PM

If you dry fire it and then take the forarm off you will have to manually recock the ejectors and on a BTF this is a real pain. I would NOT dry fire and take the forarm off. I have learned the hard way:nono:

scott kittredge 12-31-2010 03:47 PM

you should beable to dry fire it . i just tried my VHE skeet gun .dry fired it and took forend off and my ejectors did not kick than take the barrels off. mine used to kick every time i took the forend off, found out there was something off in the sear timing between receiver and forend ejectors. i had that fixed . if they do kick just use a wood dowel to reset them.

Rich Anderson 12-31-2010 04:02 PM

I accidently took a BTF off when the gun wasn't cocked and trying to recock the ejectors was a real pain. I have many ejector guns and won't take that chance.

Bill Murphy 12-31-2010 05:46 PM

OK, let's start from the beginning. Don't dry fire the gun with the forend "on". Make sure the gun is cocked. Remove the forend. Dry fire both barrels. Try to remove the barrels from the receiver. Try again and again. If you are unsuccessful, spray a bunch of whatever, maybe brake cleaner or WD-40 into the cocking slide area. Repeat the attempts to remove the barrels after putting the barrels and forend back on the gun and recocking it and dry firing it several times. Of course, the first dry firing may have released the hook. Let us know how you do.

Scott Janowski 12-31-2010 09:02 PM

At this point I am not interested in the gun due to the price, let me put it this way. Two times the asking price would bring this gun into 5 figures.
Thanks, Scott


All times are GMT -4. The time now is 05:06 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org