Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   GH Damascus (https://parkerguns.org/forums/showthread.php?t=30451)

Scott Gentry 06-18-2020 11:43 AM

GH Damascus
 
1904 GH 30” Damascus 12ga barrels .734 in both tubes both chokes start at 4.5” from muzzle ....... all pretty normal to me but both chokes are .004, beautiful slow taper and no signs of honing.
Tubes are clones of each other checked and rechecked with Hosford gauges, thoughts? I have never seen this combination would have assumed Full/Full or close to it.

Letter does not address chokes. Thanks,

Dean Romig 06-18-2020 03:35 PM

Generally speaking, if the chokes are not mentioned the gun most likely left the factory with F/F chokes.





.

Gerald McPherson 06-18-2020 07:11 PM

Scott are you sure the chokes are not .040?

Scott Gentry 06-18-2020 09:36 PM

GH
 
2 Attachment(s)
Chokes are indeed .004/.004 great dove/ clays gun.

30 yard patterns with RST 7 1/2 1 oz

Sorry for sideways pics.

charlie cleveland 06-18-2020 10:38 PM

it would be hard for a bird not to get hit with these patters...very even I like the way she throws those patterns....charlie

Dean Romig 06-19-2020 06:31 AM

Scott, what are you using for a patterning board? And is the inner circle 30” or is the pattern board 30”?





.

Scott Gentry 06-19-2020 09:25 AM

Pattern Board
 
It is a 4’ piece of 1/4” steel with a flat washer welded in the center which allows for a focal point as well as an anchor point for a homemade protractor that I use to mark the 30” circle.
Use white lithium grease and a paint roller to clear the plate for the next shot.

Board has worked out well but is not good for steel shot patterns, that would not be very safe.

Harry Collins 06-20-2020 10:47 AM

While at the West London Shooting Grounds near Notholt, England some 45+ years ago I was fitted with a Try-Gun. We shot a round steel plate eight to ten feet off the ground. They would swab it with what looked to be white wash between shoots as the stock was adjusted. I can't recall how far away we were from it though I recall it being about 20 yards or so. You have a great set up Scott.

Rick Losey 06-20-2020 11:20 AM

The range for gun fit is often 16 yards from the eye

Mathematically that allows a simple translation of inches on the board to fractions of an inch change in the stock

William Richmond 06-20-2020 03:02 PM

If they're .004 i would have expected less lead in the circle. At 30 yards that's a great pattern. I just can't get my head around that .004 choke measurements and that many in the circle. its a good pattern hunt on.


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org