Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Discussions about Other Fine Doubles (https://parkerguns.org/forums/forumdisplay.php?f=20)
-   -   Ithaca NID 16 Ga. (https://parkerguns.org/forums/showthread.php?t=14194)

Thomas L. Benson Sr. 08-20-2014 06:14 PM

Ithaca NID 16 Ga.
 
Ithaca NID 16 ga with suspect barrels. I was curious if you can find out the original length by ser. No. As you can with Parker. Thanks Thomas

Dave Noreen 08-20-2014 06:41 PM

Not readily. Walter Snyder has some records and has provided information to people, but it sounds like Walter is in the process of transferring his archive to Cody.

Bob Jurewicz 08-20-2014 06:55 PM

Walter,
NID's should have the chokes stamped on the front of the barrel flats (0-1-2-3-4). If they don't match the current constriction then there is a problem.
Bob Jurewicz

Thomas L. Benson Sr. 08-20-2014 11:37 PM

I have a Crass 16 Ga. Ithaca not a NID I finally figured out with the ser. no. of 14338 and it has 26 inch barrels. I will try and post photo's tomorrow. Thanks Thomas

Thomas L. Benson Sr. 08-29-2014 06:30 PM

5 Attachment(s)
I took a couple photo's of gun but returned it to my friend and passed on buying it. Interesting butt plate and I was concerned it had cut barrels but could be wrong.The photo of the end of the barrels are with the bottom rib on top and you can see the bead reflecting off the table top. Thomas

Thomas L. Benson Sr. 08-29-2014 06:32 PM

3 Attachment(s)
A couple more photo's

Bill Murphy 08-29-2014 10:32 PM

Nice gun. Bore micrometer $90.51 at Brownells. It will last a lifetime.

Mike Franzen 08-29-2014 11:51 PM

Nice gun. It makes you wonder why someone would put a Parker butt plate on it. If only it could talk ...

Thomas L. Benson Sr. 08-30-2014 12:46 AM

Bill: I would then need the intellectual capabilities to operate and read the findings.

Mike: My thoughts exactly. He probably always wanted a Parker. Thomas

Kenny Graft 08-30-2014 07:53 AM

Gun crank went through his junk and found a plate that fit.....at least he did not file parker bro's off and scratch Ithica on it. (-: SXS ohio


All times are GMT -4. The time now is 02:16 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org