|
looking for barrels for Parker 2 frame 12ga VHE number 204183
|
Orphaned Barrels
I Recently found an orphaned set of 30 in Damascus barrels for 64885 The barrels are not for sale except to the owner of the rest of the gun, I hope to reunite these with the original gun.
|
Bob,
I'm looking for a SSBP for a D grade for 109,352. It was removed and a pad was put in its place. Might you have it ? or know of it ? Thanks |
26 inch Vulcan 20 gauge ejector barrels excellent condition complete 237731
|
Robert - you need to remove the hashtag next to your serial number. The number will not come up in a search unless the number stands alone.
. |
Vulcan O frame pistol grip stock with widows peak that grip cap and butt plate have been removed,Nice condition 195860 or 195360 hard to tell,very small and light weight.Was told it came off grandmothers 28 gauge but book shows 20 gauge. Bobby
|
I am looking for a set of 28ga 0 frame Vulcan barrels for a hammer gun the ser # 60291 , I have the 20 ga hammer gun but the letter says it was sent back to Parker to fit a set of 28ga 0 frame Vulcan barrels to the gun, I do not know of another 28ga hammer gun from the factory. So if you have these barrels I would like to buy them, The letter does not mention the length of the barrels, Thank You Gary
|
Gary, you need a space after the serial number but you have a comma there which prevents the serial number coming up in a search.
But WOW what a find that would be! . |
Gary, who is your preferred gunsmith to convert the hammerless barrels to three lug hammer gun barrels. If you prefer, PM me your opinion and experience. By the way, Gary and John Davis assisted me in reuniting the lost major parts of two different Parker shotguns that had been separated by a total of thousands of miles for many years and installed on two unrelated guns. It can be done.
|
Bill, The barrels I am looking for should have the third lug installed by Parker Bros., When I did the Mattie gun Chris Dawe did the work, we used a set of Vulcan 32" barrels from a hammerless gun, Chris did a great job, Gary
|
Missing 20g Parker Repro barrels 20 2580
MISSING ONE SET of Parker Reproduction 20g barrels.
I purchased a Parker Reproduction with 16g barrels a few years ago that were missing the 20g barrels and case. I am trying to locate the barrels (and case) to reunite this set. I assume the missing barrels are 26” If anyone knows or hears about an orphan set of 20g barrels (s/n 20-2580) This Parker was purchased on the east coast (Connecticut) |
Folks just are not understanding the fact that in order to conduct a search on this forum of a particular serial number -
the serial number must stand alone with nothing but a blank space (hit the space bar on your keyboard) both preceding the serial number and following it. . |
20 2580
202580 2580 One set of missing barrels. See prior post for details. Not exactly clear on search criteria but hopefully one of these should work |
Third hook
5 Attachment(s)
Bill here is a photo of the third hook put on a set of Vulcan hammerless barrels also photo of the gu Mine is th hammer gun Gary
|
third hook
1 Attachment(s)
3rd hook
|
wow......charlie
|
Looking for orphaned barrel set from 60571
60571
Looking for missing 28" Twist Steel 16 ga 0-frame barrels from factory two-barrel set. |
Hi Steve - That's a DH according to the Serialization book - will any set do or do you need the lost 60571 barrels? I know you'd rather put the gun and original barrels together but it may be a long wait.
. |
88653
Original 16 ga. 0 frame 26" Damascus, "Quality 6" - one of 2 in the records. The PGCA letter says the gun was sent back to Parker 3 times, twice for restocking/stock alterations. Last time it was sent back the order specified adding a set of Titanic Steel barrels; no length specified. I would like very much to find these barrels if in fact they were ever made for this gun. |
2 Attachment(s)
GH
115048 According to PGCA letter, it came with Damascus barrels, 30 inch as well as a 2nd set ordered in 24 inch. Gun came with 28 Vulcan barrels when I obtained it. Whoever did the barrels stamped them with an extra 1 in Front, maybe 1st set ? |
The original 30” Damascus barrels would have been stamped with a 1 on the forend loop (lug) and the 24” set would have been stamped with a 2 in the same spot. Originally it would have come with a separate forend for each set of barrels and they would have been stamped 1 and 2 respectively above the serial number.
With that extra 1 stamped at the beginning of the serial number, it is doubtful that Vulcan set was added either at Meriden or at Illion. . |
53944
ISO Parker 16 gauge Top Lever Hammer Grade G w/26” barrels. Lost lost/misplaced/sold family gun. Serial # 53944. Thanks.
|
49675
Looking for 12 gauge 28” barrels serial # 49675. Fit Grade 3 top lever hammer in my possession. Thanks.
|
I ask around.
|
looking for DHE 20 BARRELS
Looking for 20 ga DHE 28" barrels
233627 thanks kurt |
CHE 12 gauge 32" Barrel pigeon gun
ISO Parker CHE 32" Serial No. 132269
Should never have sold it. |
Kurt, try the folks at Robin Hollow.
|
Edit; I quoted an earlier post of mine before i added 134429. I added it to the list below.
I'll add another to the list. It is in red at the top of the list. It is off a DH made in 1901. The specs for 101595 are TI3 H 0 C 12 32". I also have a small plate that I can't find any indication that it ever had a serial number stamp. Looks like a D grade by the engraving. There has been some corrosion, or perhaps it wasn't finished on the hidden side to the same degree as most, but it should have shown some marks. Odd. Quote:
|
Looking for extra barrels for 150077 Parker VH 16 0 frame
|
Have trigger guard for 205380
|
Looking for 2nd of barrels for 115048
24 inch on a 12ga GH |
Looking for barrels for 12 gauge 3 grade for serial number 80135 it wearing 2 frame Damascus numbered 69830 a poor fit. Don
|
is there any hope of finding a good stock for a DH-4 Parker. Wrist is shattered on the one in my shop for preservation
|
We know what a DH is but what’s a DH-4 ?
. |
53960 forend
2 Attachment(s)
ISO forend number 53960 for Parker 12 gauge Top Lever Hammer Grade G. I have number 55791 Grade 3 forend that I will part with in trade for 53960.
|
Quote:
|
a friend has a nice #2 frame , 12 ga., VH, extractor gun which is missing a forend. If you have one it would be appreciated. darylh1942@gmail.com
|
Looking for any parts pertaining to a1924 Parker:
207809 |
Looking for 32" 20 gauge barrels for 155375. It is a two barrel set, DHE 20 that has its 28" barrel set and would love to find the 32" set to make this gun whole again! Thank you!
|
WTB 28 inch 20ga Damascus barrels serial # 84040
I’ve been searching for several years for these barrels that were separated from my BH 20ga serial # 84040 years ago. These are Damascus extractor barrels that were likely retired in 1937 when the gun was updated with ejectors.
I will be willing to work with any serial number as long as they are 28” Damascus “0” frame barrels. Extractor or ejector. Send me a PM. |
| All times are GMT -4. The time now is 04:14 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org