I'll add one more to the list. It is only 2 numbers off one of the others listed. This one is 134429 . According to the serialization book it is off a DH 20 gauge with 30" barrels and a straight grip.

I have forend for CH 207512

and forend for VH 148759

parts for 148348
and 151106

and am still looking for VH 20 153333

Thanks, Bill Murphy

I am looking for the forend for 172668

I am looking for the forend for end for Parker VH 173702

It will be and extractor not ejector

Looking for original CH barrels to 82331. Thank you

barrels
 

Looking for 10 ga.32" twist 32783
I have barrels 10 ga. 32" twist 18828 Thanks, Herb

previous thread
 

Don't know how to remove thread before this one? but it is incorrect. I have the complete gun,sorry for the wrong posting. Thanks, Herb

VH Fore End
 

I have VH forend number 237286
Vh 28 Inch 12 Gauge by the serial number book
Forend includes metal

correction...letter says 30" dams

one more time....# 68069
ch 12 missing 30" dam barrels

I'm looking for buttstock for 12ga PHE # 216761 also for end.
also need bbls for 12ga VH 204183

I have a very nice 16 ga DH, Sere # 75209, with original 28" damascus barrels. According to Order Book # 53, the gun was sent back to Parker in July of 1901 and fitted with a new set of 30" damascus barrels. I know this is a VERY long shot but I just wanted to throw it out there in case someone happens to have the second set of barrels.

Thanks,

JDG

Looking for 32" 10 gauge, no. 6 frame 10 gauge barrels for Parker serial no. 162006

Oh boy...

I don't remember the serial number but we put a set of cut 10 ga. barrels in the 2013 silent auction and they were either a 5 or a 6 frame.

I remember they were top action hammer barrels. I think they were 4 or 5 frame.

Any Information on the whereabouts of 55095.

Looking for 147523 barrels, it's a CH.

Looking for ejector forend for VHE 206701

Jay and Edgar, you have to separate your serial number from any other words or punctuation to allow your serial number to be available to the "SEARCH" function. Good luck.

Per Murph's instructions, I'm looking for any info on 55095 which includes whereabouts, original shipping location, etc.

Way to go, Edgar. Remember, my C Grade Charleston gun was found in a google search. It happens.

Looking for barrels belonging to Ser # 75209

Thank you,

JDG

Looking for eight gauge Twist Steel barrels # 121593 and also the forend with the same number. Thanks. Any set of eight gauge barrels for a hammerless gun would be welcome.

SSBPs
 

I have the following skeleton buttplates:

1) SN 66377 according to records is a BH DAM capped pistol grip 12 ga. 30" hammerless.

2) SN 121050 according to records is a CHE 12 ga. with 30" Titanic Steel barrels with straight grip.

Looking for 12ga GH Dam barrels # 91070

I have some information on Parkers which may have been parted out.

Some background: I had ordered a trigger plate and some other parts for 56901 from Numrich, and, due to some ordering quirk, I received three orders. For the record, I received trigger plates from 63538 (swirl engraving), 139465 (pheasant/bird engraving), and from 175201 (plane). Also, forend tips received were from 2358? (plane), 87674 (engraved), and from 88603 (engraved).

On another purchase on ebay I received a forend lock from 223184.

It can be presumed that these guns had been parted out. I thought that the Association might be keeping records of such findings and wanted to list this information for the benefit of our members.

I’m “restoring” 56901, a grade E 10 gauge, with a #2 frame. Sometime in the distant past the correct #2 barrels were replaced with #3 10 gauge 32 inch Damascus Steel barrels from 58692. Don’t know why or what happened to 58692 but it was likely parted out too. I’d very much like to obtain a set of #2 10 gauge 32 inch Damascus Steel barrels to return the gun to its original configuration. Can anyone help? I’d also like to obtain a set of #2 12 gauge steel barrels to allow me to occasionally actually shoot the gun. Can anyone help here too?

forend
 

forend # 18777 0 grade I have it.

forend
 

Wanted forend D grade # 46928
Herb Hewlett

I am looking for 30" Damascus barrels for CH 98497
Also 2nd set 30" Titanic steel barrels for
DH 81377.
Thanks

99433 Barrrels
 

Looking for orphaned set of barrels for serial number 99433

Someone here posted back in 2007/2008 that they owned them. I was busy with The Fab-5 on a Philadelphia revival of sorts and must have been asleep at the wheel. I could have sworn the owner described them as 16b Damascus? Tried the search function in the archives to find the original email but it's not operational. Obviously, looking to reunite. If only this Parker could talk. :whistle:

Two corrections to my earlier listing follow:
First, the bottom/trigger plate numbered 175201 should be 115201. Rechecked this time with my glasses on.
Second, I checked my Parker Letter and the original 10 ga barrels for 56901 were 30 in. So I'm looking for a pair of Damascus Steel 10 ga. #2 frame 30 in barrels, not 32 in.

Barrels and forend for serial# 61779
 

Local guy was advertising theses barrels so I picked them up. They are damascus thought he serialization book said this gun was supplied with twist barrels, it also said a second set of barrels was supplied so these must be them.

They are a bit rough, with the left barrel having some dents and what looks a bulge that may have been attempted to repair. To my unpracticed I I don't know that they can be fixed, but if someone has this gun maybe they want these barrels and forend. Forend is complete, but all the checkering is worn off.

I'm looking for 10 Ga. barrels twist steel 30 inches in length 49091 Thanks Thomas

Ophaned Barrels Found
 

I have the following barrels that could be reunited with the guns.

238328, 174484.

jcweberx1@hotmail.com

194583
 

Default Looking for barrels 194583 20g 32"
I'm looking for the other set of barrels for my 20g DHE. They are 32" titanic

I figured I'd give this a shot. Thanks

Need
 

Looking for barrel for GH #1 frame, current barrels are pitted beyond safe use. A family gun that I would like to put back in service.

This list is for reuniting missing parts. You are better served posting a WTB request with pictures of what you have. George

235896 Forend Wood?
 

Greetings!
235896
Need the forend wood and tip for my DH 12 ga. 1-1/2 frame with ejectors.
Likely a splinter?
The original wood will likely be dark.
Someone put a BTFE on mine and didn't even come close with the color...

Or, I could use a similar used piece with the tip to put on my gun...
Thanks again for a great site!

Looking for Vulcan steel barrels, 12ga, 28" #2 frame for 88490.