Parker Gun Collectors Association Forums - Primer piercing and recoil pad

Page 4 of 4

Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Primer piercing and recoil pad (https://parkerguns.org/forums/showthread.php?t=28504)

Brian Dudley

11-06-2019 10:08 AM

Quote:

Originally Posted by Seth Mackay-Smith (Post 284701)

While I'm sitting around hoping for someone to respond with actual measurements of their plungers, could someone please let me know where to get new ones? I'd like to get a set and though I could simply make my own I'd rather have the benefit of a trusted supplier's expertise.
Thanks,
Seth

I just went through my parts bin and pulled out all of the T/L firing pin plungers that I have. 9 in total. They measure from 1.003" to 1.016"

You're welcome.

Seth Mackay-Smith

11-06-2019 11:28 AM

Great, thank you very much, Brian. Looking at some old threads, others have eyed up a measurement of an inch, so looks like that was the spec.
Appreciate the info.
Seth

Dennis E. Jones

11-07-2019 09:43 AM

I have a very old hammer Parker that had what I believe were replacement firing pins/plungers that were not correctly shaped i.e. they were quite pointed. I've never fired it and never intend to as it is in sad shape but I did remove the plungers so no one else would try to shoot it.

All times are GMT -4. The time now is 01:38 PM.

Page 4 of 4

Show 40 post(s) from this thread on one page