Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   where will the annual meeting be held? (https://parkerguns.org/forums/showthread.php?t=6387)

Bill Mullins 02-15-2012 11:18 AM

2012 Annual Meeting
 
All that have voiced an opinion on the selection of the 2012 Annual Meeting location, thank you, and just let me say that your Board of Directors spent several hours considering a site. It was not just a quick decision and much input went into the decision. Several venues were considered.
1. Time of year (hunting season) It was felt that dove season starts in most sates in September, grouse in early October, Pheasant mid October, quail in November,etc. and there would be plenty of opportunities for all members to have time to shoot feathered targets before and after the Annual meeting.
2. Shooting grounds that also offers a gun show-exhibitor-vendor venue.
3. Motels and conference rooms large enough to accomodate attendees.
4. Driving and or flying time.
5. Membership geographical location.
6. Backwoods is a premier location with outstanding well attended shooting,parking, club house facilities---(also selected to host the 2013 International Sporting Clays competition).
Just a little background that was factored into your Board's decision. Much sole searching goes into selecting annual meeting locations.
Hopefully, this will clarify some of the decision process the Board goes through regardless of the final site location.
Thanks, Bill

Dave Suponski 02-15-2012 04:29 PM

To keep this in perspective the distance from Sanford,NC to Georgetown SC is only 190 miles.

Bill Murphy 02-15-2012 04:34 PM

Those who go will have stories to tell about guns they have found there. I'm running a little short of small bore hammer guns.

Eric Eis 02-15-2012 04:37 PM

Quote:

Originally Posted by Dave Suponski (Post 62772)
To keep this in perspective the distance from Sanford,NC to Georgetown SC is only 190 miles.

Dave "Only 190 miles":shock: that's another 3 hours of drive time (seventeen hours for us) for any of us northerners :eek: plus it's in primetime bird season in most areas of the country. I hope it works out but I have my doubts. Eric

Dave Noreen 02-15-2012 05:13 PM

What a bunch of whiners!! I drove 2400 miles one way to the annual meeting in Louisville, Kentucky, last September and have come, flying or driving, to eight of nine The Vintage Cups since I moved west in 2002. Either say you are going to come or don't. Or, run for the board and take responsibility.

I miss the big PGCA presence Ron use to have at the winter Las Vegas show, but if someone doesn't volunteer to do it, it isn't going to happen!!

Bill Murphy 02-15-2012 06:02 PM

I agree we should have a positive attitude, but our presence at Winter Vegas some years ago was like a pea in a pot of pea soup. We made a presence at the Vintagers and at the OGCA, but not at Vegas.

Bruce Day 02-15-2012 06:25 PM

It takes 20-30 nice Parkers to put up a decent display. A couple people would have to drive and haul guns, stay in hotels, pay the fees, I 'll bet it would cost a couple thousand out of their own pocket. I know we spend $500 to $700 each when we do Pheasant Fest. Sometimes when we see "the PGCA oughta do this or that", people don't realize that there is no PGCA with a gun display and somebody has to have the guns, bear the expense themselves, haul the guns and set up and man the display . I know from my own experience that people get burned out and say"enough".

Bill Murphy 02-15-2012 08:16 PM

Rick's is a wonderful venue. I'm sure everything will work out.

Gary Carmichael Sr 02-15-2012 08:43 PM

Well, I did not mean to start a rucuss just wondered where and when one other question will we be able to have a tables for display? Yes it gets old hauling guns from one venue to another but when a person that does not know what a Parker is stops and ask questions, you get a chance to tell him about the best side by side made in this country it makes it all worth while and also gets new members!

Dean Romig 02-15-2012 09:16 PM

Quote:

Originally Posted by Bill Murphy (Post 62773)
I'm running a little short of small bore hammer guns.


There is a nice Grade 3 20 ga. Lifter coming to auction pretty soon if you don't mind setting your float plane down onto the Kennebec.


All times are GMT -4. The time now is 05:54 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org