Parker Gun Collectors Association Forums - RECEIVER PINS WORKING LOOSE

Page 3 of 3

Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- Parker Restoration (https://parkerguns.org/forums/forumdisplay.php?f=8)

- - RECEIVER PINS WORKING LOOSE (https://parkerguns.org/forums/showthread.php?t=25373)

Craig Budgeon

10-06-2018 06:50 PM

The ends of sear pins are rounded so that they do not mushroom during installation.

edgarspencer

10-06-2018 07:14 PM

:crying:

Quote:

Originally Posted by Brian Dudley (Post 255415)

1 and 1-1/2 frame would be different lengths from each other. 1-1/2 and 2 frame are the same length. Since the frames are the same width at the stock head.
The pin lengths correspond with the different widths of the frames.

Yes, since we're splitting hairs, Brian is correct. A 1 frame pin is .100" longer than an 0 frame pin, and a 1-1/2 pin is .110" longer than an 0 frame pin.

All times are GMT -4. The time now is 06:23 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page