I have a DHE #3 frame 12 gauge with SST, rebarreled by Remington and I think also restocked by them. Weighs in at around 8 lbs. 10 oz. with 30" barrels choked M/F. BTFE, 1940's period(?) recoil pad. AAH style checkering. Hasn't been used a lot from the condition of the finish.

Its looking for a new home, too.

My DH grade ten gauge magnum, sleeved by Lefever, was originally a 32" #3 frame 12 gauge. Fortunately, a ten gauge magnum Lefever sleeved gun is even more scarce than an original #3 frame 12 gauge. It is the first Parker I have seen with the rib expertly remarked "Lefever Steel" where the original "Damascus Steel" was removed.

Gary

I had one walk into the shop last week. It did not leave. A #3 frame 12 ga. 32" Damascus grade two top lever hammer gun. The barrels have 80% original finish, 20% color case, the wood is in great shape. I have not had a chance to clean it up yet. I will post pics after I do. It has great dimensions and swings wonderfully.

Brad

John, check your chamber length, I suspect they are 2 7/8 inches for 3 inch shells.

I'm waiting on a letter as we speak on what I believe to be a Grade 1 hammer 3 frame with 30 inch barrels which the book said was a 10 Ga. If interested I can post photo's. Thomas

[QUOTE= If interested I can post photo's. Thomas[/QUOTE]

are we EVER not interested :corn:

I got both these Parkers from the same gentleman. One is a 32 inch 10 ga. and the other is the 12 ga. 30 inch with both being 3 frames. Thomas

I have a 3 frame 12ga with 32 in. Barrels. It is a top leaver GH with damascus barrels and in really nice condition. I would post pictures but I haven't been able to figure out the process yet. Carvel

Here is a 3 frame 12 gauge GH seen at the Fall Southern at Backwoods. This was probably the most tempting gun there

do you have a photobucket account? they are free

or just create an album here on the PGCA (you can upload right from your computer) and then link the album (or we can show you how to do the individual )