You guys think that stock is original? Seems to have an awfull lot of curl for a GH.

Yes I do. I have seen some G's with just great wood.

Yes i have seen some g"s with some great wood

I'd align the solitary floor plate screw and that's it.

I would send to Delgrego to check over & advise. I have for 50 years every Parker[25-30]Jim

That is probably good advice and if I decide to keep it that is probably what I will do, either him or Bachelder in Michigan.

Loaded up some 7/8 oz shells with PB powder and shot the GH last night. Ran a 23 in skeet and a 20 on our 5 stand course using the 27 inch cyl and skeet barrels. Gun shot great and there is no recoil at all with this #2 frame gun and low pressure loads. I'm really impressed with this little gun. I'm going to send it out and have the screw head fixed and the gun gone over and cleaned inside. What a great find this little gun is.

I would send to Delgrego to strip & clan. The screw head he may be able to shave head for slot to line up. After 70years we all need a good fall cleaning. Do not buy winchester promo loads use other brands; the firing pins on doubles of vintage stick on soft winchester primers told to me by Ken Eversull[best english gunsmith&Fabbri]. I own 20 various sxs & they all stick on WIN, Purdey to LC hang on Winchester.Jim Mayer

PS wiping gun with clenzoil is great including wood; i use their hinge pin grease; it really enhances wood. My DT10 is 2 grades higher in luster; i have no intrest in clenzoil financially 60 years experience no more 3in1oil.jim mayer& my others

Shot this gun last week and it shot wonderful. Had a ball with 7/8 oz low pressure loads. Broke a 23 first round of skeet and 20 first round of 5 stand using the 27" barrels. What a great gun.