Parker Gun Collectors Association Forums

Page 2 of 3

Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - VH ST Doubling (https://parkerguns.org/forums/showthread.php?t=39462)

David Penland

06-21-2023 04:04 PM

3 Attachment(s)

Here you go.

Frank Srebro

06-21-2023 06:06 PM

First pic with R S L stamps is typical for the first early design Miller conversion.

Bill Murphy

06-22-2023 09:49 AM

Yup, a first generation Miller without the identifying stamp on the trigger itself.

Frank Srebro

06-22-2023 11:18 AM

1 Attachment(s)

Quote:

Originally Posted by Bill Murphy (Post 390774)

Yup, a first generation Miller without the identifying stamp on the trigger itself.

Or MILLER is line stamped on the trigger a little higher than typical and it's hidden by the body of the trigger guard. There's plenty of surface area available. This one is typical on a Fox.

.

David Penland

06-23-2023 03:41 PM

Had the trigger pull checked and it is around 4 lbs. loosened the back tang screw so it was flush with the tang. Tried R/L and it works sometimes and double’s sometimes. L/R works. The gun is in need of a good stock. The wrist is very thin and there is a repair.

Mike Koneski

06-23-2023 04:24 PM

Thin wrist with a repair. Could be wood or something in the repair is making contact with something in the trigger mechanism?

David Penland

06-23-2023 05:57 PM

1 Attachment(s)

I took it apart. Insides are pretty contaminated.

David Penland

06-23-2023 06:09 PM

1 Attachment(s)

Here is the trigger

David Penland

06-23-2023 06:12 PM

1 Attachment(s)

Here is the stock.

Brian Dudley

06-23-2023 10:51 PM

That stock is more than likely the issue

All times are GMT -4. The time now is 10:08 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page