Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   Info needed PH grade (https://parkerguns.org/forums/showthread.php?t=32300)

Steve Huffman 01-29-2021 06:32 PM

Quote:

Originally Posted by Don Strelioff (Post 323696)
The bbl is 26” so it has been cut .
My speculation about it been used for skeet is because the fellow that owned it had a model 21 skeet gun .
More speculation he cut the bbl’s and shot skeet with it .

Did you read my post about the barrel length from the serialization book from what the book has IT HAS NOT BEEN CUT ! Bill is asking you to buy a book for $29.95 !

Jim DiSpagno 01-29-2021 06:38 PM

Reread the top posts. It’s a 1 frame capped pg and 26” Parker steel bbls

Don Strelioff 01-29-2021 07:19 PM

Ok thanks everyone I will do my research.

Mike Poindexter 01-29-2021 07:56 PM

Serialization book says only 1000 PP guns produced. If the chokes are both open (and the dime means virtually nothing) it might well work as a skeet gun for you. Probably not trap, and not clays. This gun would normally have a somewhat higher value than a comparable gun with twist barrels. Good luck!

Dean Romig 01-29-2021 07:57 PM

Cool..... my 9 lb. 10 ga. Lifter has uncut 30” Damascus barrels and I have shot a LOT of Skeet with it, but that doesn’t make it a Skeet gun... by any means.





.

Dean Romig 01-29-2021 08:14 PM

Quote:

Originally Posted by Mike Poindexter (Post 323712)
Serialization book says only 1000 PP guns produced. If the chokes are both open (and the dime means virtually nothing) it might well work as a skeet gun for you. Probably not trap, and not clays. This gun would normally have a somewhat higher value than a comparable gun with twist barrels. Good luck!



Mike - please explain what a "PP gun" is. I'm at a loss...





.

Jim DiSpagno 01-29-2021 08:25 PM

Abbreviation for Parker Steel in the ser book

Dean Romig 01-29-2021 08:41 PM

Oops, my error - edited.




.

Don Strelioff 02-01-2021 11:34 PM

Thanks for your input mike as invalid as it

Don Strelioff 05-07-2021 01:10 AM

Quote:

Originally Posted by Steve Huffman (Post 323462)
This is a 12ga with 26in Parker Steel Barrels with a capped stock Sounds intresting

Here are the specs
26” bbl’s
Left bbl bore .729 Muzzle .714”

Right bbl bore .729 muzzle .704
Bbl weight 3.7 lbs
Frame no .1
Parker steel bbl’s


All times are GMT -4. The time now is 01:27 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org