Parker Gun Collectors Association Forums

Quote:

Originally Posted by Bill Murphy (Post 304469)

Unless you are carrying the shells all day in your pocket, why do they have to be crimped at all. Some loaders use "water glass" to seal the over shot wad. I may go to the water glass sealant because crimping is such a pain. I have no idea how to get water glass, so I guess Duco cement may be a good substitute. I always loaded my 10 gauge blanks with no crimp. 3 1/2" shell filled to the brim holds a lot of black powder. I once shot a serious overload, and my Winchester cannon did a back flip off of a wood pile. It landed on soft asphalt and was not damaged.

I gave always wondered if you could make use out of the extra room you get from a 3.5" shell sealing(overshot card glued in place) that way . I believe crimping them with a star crimp takes up about 1/2" of space . Some of the 10 ga 3.5" loads I used to buy would be 3" crimped but some other brands were actually shorter than that .

You can get a 1 gallon jug of water glass for $20 , could probably do alot of shells with a gallon . This is how Larry Potterfield does his brass shells , I cant recall if it was on his 11 gauge Parkers video or the 10 gauge .