Parker Gun Collectors Association Forums - Forearm Reinforcement Rod

Page 2 of 2

Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - Forearm Reinforcement Rod (https://parkerguns.org/forums/showthread.php?t=29300)

Brian Dudley

02-10-2020 09:53 AM

John,

I checked what I had here for SBT forend parts.

I have a total of 5 set forend wood in the parts drawers. ONE of those have the 3/8" diameter hole for the draw bolt head (which is also the standard size for the doubles). the other 4 are 11/16" diameter.
I have 3 SBT draw bolts. And those all have 11/16" heads on them. The length of the bolts measured from the shoulder is 5-3/4" on all of them.

John Davis

02-10-2020 10:37 AM

1 Attachment(s)

So it looks like the rod is about a 1/4" short. SB on the bottom, SC on top.

Brian Dudley

02-10-2020 10:42 AM

It appears as such.

All times are GMT -4. The time now is 01:19 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page