Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Restoration (https://parkerguns.org/forums/forumdisplay.php?f=8)
-   -   Timing - Good Times? (https://parkerguns.org/forums/showthread.php?t=24881)

Jerry Harlow 08-05-2018 07:49 PM

But it makes one wonder why the hammer screws go vertical (perpendicular) when every other action screw goes parallel to the barrels on a Parker. Just wanted to be different I guess.

Scot Cardillo 08-06-2018 12:06 AM

To expound on William’s explanation when he says you can calculate how much material to remove under a screw head.

The calculation is very simple. Divide one (as in one inch) by the pitch of the thread, that’s it. Knowing the pitch of a thread will tell you how far any given fastener will advance when it’s rotated exactly one full revolution.

For example, a pitch of 20 threads per inch (tpi) is calculated as follows: 1 ÷ 20 = .05. In other words, one full revolution of a 20 tpi screw will advance fifty-thousandths of an inch (.05).

A screw thread with a pitch of 48 tpi will advance .0208 per full revolution. (1 ÷ 48 = .0208)



To expound even further on the subject of threads, for those who are interested; a fine thread is generally stronger then a coarse thread (mechanically). The trouble with a fine thread in some cases is how many turns the hardware requires to drive the fastener home. This is resolved by machining multi-lead threads. For example, a 20 tpi double lead thread will advance twice the distance as a single lead thread or, one hundred thousandths per revolution. (.1). That’s achieved by chasing two separate threads with a pitch of 10 tpi that begin (and end) exactly 180 degrees from one another on the workpiece. A triple lead thread - same thing only now the workpiece has three individual threads that begin, and end, exactly 120 degrees from one another. From an engineering and manufacturing perspective, the number of leads is basically unlimited, especially since the advent of CNC that greatly benefits set-up time in comparison to setting up an engine or tool room lathe to achieve the same thing. On a CNC lathe, or mill using thread mills, it’s literally a few additional lines of code and you’re all set.

Dean Romig 08-06-2018 08:06 AM

Interesting stuff Scott - you must do that as a profession.





.

William Davis 08-06-2018 10:01 PM

Threads and threading is a fascinating study. To go into detail get a copy of Machinerys Handbook. The big thick one, they come out with new editions often & the most current is expensive. Older editions inexpensive used and for a topic like threading just as good.

I am a hobby machinist and always impressed what a true machinist can do. Sadly it’s becoming a lost art.

William

Tom Flanigan 08-07-2018 09:19 AM

The level of knowledge on this board always amazes me.

Kevin McCormack 08-11-2018 11:21 AM

Quote:

Originally Posted by Tom Flanigan (Post 250096)
The level of knowledge on this board always amazes me.

The level of anality also amazes me!

Kevin McCormack 08-11-2018 11:22 AM

For the umpteenth time, INTERNAL COMBUSTION ENGINES ARE 'TIMED'; SCREWS A 'QUALIFIED'!!!!!!!

Tom Flanigan 08-11-2018 11:28 AM

OMG Kevin. I'll try not to make that mistake again. Fall is coming. If you make it to Millbrook this year, let me know. Maybe we can round up a few grouse and woodcock.

Dean Romig 08-11-2018 03:59 PM

Quote:

Originally Posted by Kevin McCormack (Post 250414)
For the umpteenth time, INTERNAL COMBUSTION ENGINES ARE 'TIMED'; SCREWS A 'QUALIFIED'!!!!!!!


HA! Gotcha Kevin! You made reference in Russ Jackson’s For Sale thread to the screw in the stock head not being “TIMED” with no cross-reference...:bigbye:







.

Daryl Corona 08-11-2018 04:17 PM

[QUOTE=Dean Romig;250422]HA! Gotcha Kevin! You made reference in Russ Jackson’s For Sale thread to the screw in the stock head not being “TIMED” with no cross-reference...:bigbye:


I knew exactly what Kevin meant as we chuckle about "timed" screws quite often. There also is the debate over water table vs. action flat. Please don't let either keep you up at night:rolleyes:


All times are GMT -4. The time now is 01:03 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org