Fathers Parker
 

There is an Antique Arms Show September 15, 16 at the Surburban Showplace. Put on by the Michigan Antique Arms Collectors. I will have a table there as will others. Bring it and shop it around for the best price. (edit) Also more importantly what the sellers are asking for their similar guns.

Hi Den, Thanks for the information about the show in Michigan.
Mills, Thanks for the warm welcome.
Opening Day, Thanks for the advice about barrel length and Gauge. I also will measure the inside diameter of the end of the barrel. Thanks!
Scott St.Pierre

Scott - Simply measuring the muzzle diameter won't necessarily give you choke data, as choke is defined as the reduction in diameter at the muzzle versus the bore diameter. If you make an assumption that the nominal bore diameter of a 12 gauge is .729", then your muzzle measurement may be a reasonable guess. However, bore diameters vary widely. The terms Full, Mod, etc, are in fact defined by pellet concentrations shot on a target at specified distances

As a member you can identify posters by "real name" by clicking on their screen name on each post.

28" 12 Gauge Barrel pictures
 

Here are a few pictures of the 28" 12 gauge barrel

Forearm, butt plate and underside of barrel
 

Here are a few pictures of the forearm,butt plate and underside of barrel. Yes the but plate is a aftermarket add but it was installed for the original owner who lived in Petoskey MI

Receiver
 

Here are a few pictures of the receiver.

Side views
 

Here's a few pictures of the side view

Thank you
 

I want to say thank you to everyone for your help.

Thanks!
Scott St.Pierre

Info
 

I thought I could click on the pictures to make them larger. The barrel is 28" long 12 gauge. The serial number is 123121 and its a Vulcan steel barrel.