thanks jerry i will look and call and get me a 6 point crimper...charlie

My .410 Grabber is set up for 2 1/2" shells. Mine has a 6 point crimp starter. I load nothing but Winchester AA's because both of my .410's like them. Once I got the adjustments all figured out for the specific hulls that I wanted to load, they came out fine.

I have three Grabbers, .410, 20, and 12. They all have to be tweaked for whatever shell that I am using. I found what worked the best in most of my guns and settled on those for each gauge. If I try a different hull, I have to readjust the press. I'm probably not telling you anything that you don't know.

If you get that 6 point crimp starter and get your Grabber set up for the shells that your guns like, I bet you will really be happy with it. Good luck with it.

I can load 12ga Rem or Win shells without any adjustment, 20ga the Win are a bit longer so an adjustment is necessary, and haven't reloaded the 410 so I don't know anything about them. I only reload the Rem in 28ga. I agree with Tad - once set up you'll be happy.