I know the gun and you made a dam good buy. It so happens I have a set of 30" 2 frame VH barrels that will fit it. To try and find a good set of original CHE barrels would be difficult and expensive. I think Tom Carter may have a set though.
David

IMHO, if you're wanting this gun as a shooter I would'nt think a different set of barrels would change much. It's still going to be just a shooter and not a highly collectable original gun.
Buy it for what it is and put it to good use. One thing I would say is be more concerned with the choke installation rather than the monoblocking. Like does it have safe thickness in the choke tubes and muzzle of the barrel? I have seen and owned guns with after market choke installations that developed a bulge in the barrel at the tube. Likewise, very thin chokes can peel forward inside the barrel. If done correctly you should have no problem.
Do you know what the barrel steel composition is? Will you be able to shoot steel shot if you so desire? With replaceable chokes this can be a universal gun and have good pedigree to boot!
Good luck!

Is/was it rondel engraved? If so can you divulge the first three numbers in the S/N?

Don't know, won't see it until tomorrow evening.

It is not rondell engraved.

I had a set of 30 inch titanic barells #2 frame, someone tried to fit to a 1 1/2 frame and messed up the breach end but both top and bottom rib were excellant, so someone contacted me and I told them of the situation and they
Wanted the ribs to use on his Titanic D Grade barells that
Were damaged. WONDER HOW MANY SWAPS WERE MADE LIKE THIS ???