Parker Gun Collectors Association Forums

Page 2 of 2

Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)

- - 16GA Trojan Information (https://parkerguns.org/forums/showthread.php?t=16365)

Daryl Corona

05-12-2015 09:41 AM

Believe me Brian, when we are all gathered around in our walkers and wheelchairs at your wake, toasting you with some fine cognac and a good cohiba, the only thing you will be remembered for is your fine gunsmithing not for you bad speln.:)

Dean Romig

05-12-2015 10:41 AM

Omigosh... I'm sorry - I didn't know Brian had a bad spleen.

edgarspencer

05-12-2015 11:05 AM

Quote:

Originally Posted by Dean Romig (Post 167719)

Omigosh... I'm sorry - I didn't know Brian had a bad spleen.

He doesn't. He splained himself fine. I'm wondering who Daryl was cohabitating with.

Michael Decker

05-12-2015 11:12 AM

Quote:

Originally Posted by Brian Dudley (Post 167694)

Chokes can only be properly measured with a bore gauge so that the constriction from bore to muzzle can be read. But, given the era that your Trojan was built, the bore diameter should not be too far off from modern nominal dimensions. So a drop in guage will get you in the ballpark.

Thank you Brian. I am going to stop by my local gunsmith later this week and see if he has one of those fancy micrometer gauges, but if not I will pickup a drop in and see what it has to say.

Michael Decker

05-12-2015 01:58 PM

Updated original post with the barrel length of 28".

All times are GMT -4. The time now is 12:11 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page