Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   EH weight difference . (https://parkerguns.org/forums/showthread.php?t=15820)

charlie cleveland 03-07-2015 09:29 AM

except maybe for the 2 frame you ain t gona see much differant in the weight of these guns..i m going by the 10 ga that i ve seen this in..i have a 32 frame 10ga it weighs 11 1/2 lbs the rest of my 3 frames weigh in at 9 1/4 to 9 1/2...the 4 frame guns in 10 ga will be close to 9 1/2 and 10 lbs...the 5 frames areclose to this also...there are exceptions...noy in 6 frame guns about 11 to 11 1/2 some heavier..then the 7 frame usally the 8 ga from 11 1/2 to 15 lb s...this is based on my oberservations thru the years...charlie

Bill Murphy 03-07-2015 09:45 AM

EH and NH tens were not made in #4 and #5 frames. The 4, 5, and 7 were hammer gun frames unless there is some rare exception out there. EH and NH tens were made in #2, #3, and #6 frames.

scott kittredge 03-07-2015 12:22 PM

Quote:

Originally Posted by CraigThompson (Post 161599)
So back to my original question what were the average weights for NH-EH in ,

#2 frame 30"

#3 frame 32"

#4 frame 32"

#5 frame 32"

my EH 2 frame, 30 in. is 8 3/4 lbs
my EH 3 frame, 32 in. is 9 lbs
i had a NH 32 in. 3 frame at 10 lbs

Bill Murphy 03-07-2015 01:49 PM

I have two 32" #3 frames that weigh 10 pounds. I have one that weights 9 pounds, 8 ounces. I have a 27" #2 frame ten that weighs about 7 1/4 pounds. All #4 frame hammer guns that I have weighed are just at or under 11 pounds to take advantage of the maximum allowed weight of pigeon guns in the mid 1880s.

CraigThompson 03-07-2015 04:01 PM

Quote:

Originally Posted by Bill Murphy (Post 161658)
I have two 32" #3 frames that weigh 10 pounds. I have one that weights 9 pounds, 8 ounces. I have a 27" #2 frame ten that weighs about 7 1/4 pounds. All #4 frame hammer guns that I have weighed are just at or under 11 pounds to take advantage of the maximum allowed weight of pigeon guns in the mid 1880s.

So the only hammerless 10 gauge frames were #2 , #3 and #6 with the exception of the one gun built on a #1 frame correct .

Also there was no such thing as a hammerless #4 or #5 frame ?

Sorry I see you pretty well answered all this in a post above !

Bill Murphy 03-07-2015 07:14 PM

That is the way I have found it to be. #6 frame tens, even though you didn't ask, are from 11 to 13 1/2 pounds, in my experience. I probably have one of the bigger ones, a 34" six frame NH ten with wall thickness no less than .100" anywhere and much more toward the breech. I think that is the 13 1/2 pounder.

CraigThompson 03-08-2015 02:53 AM

In my Parker photo archives on my PC I found I already have pics of EH/NH guns on #2 , #3 and #6 frames . Also happened to have pics of a Grade 3 #4 frame gun .

About 2 hours ago it seems that I have finally added a Parker EH #2 to my somewhat modest accumulation .
IF it turns out to be as nice as the pics I'll be satisfied . Hopefully I can lay my hands on an EH #3 frame gun soon .

Carvel Whaley 03-08-2015 10:06 AM

I have a grade 3 4 frame 10 ga with 32 in barrels. Not sure of the weight but will weigh it today and post. Carvel

Bill Murphy 03-08-2015 11:23 AM

Carvel, I assume that is a hammer gun? We would like to hear more about it. #4 frame tens are often built for competitive shooters. Who was the person who ordered yours?

Carvel Whaley 03-08-2015 07:47 PM

Bill, it is a hammer gun, ser. no. 38523, it weighs 10 lbs. 14 ozs. I do not have a letter on it and do not know who ordered it. Carvel


All times are GMT -4. The time now is 09:40 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org