Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Hammer Guns (https://parkerguns.org/forums/forumdisplay.php?f=14)
-   -   10 gauge Damascus lifter (https://parkerguns.org/forums/showthread.php?t=36896)

Dean Romig 07-20-2022 06:18 PM

Yes, that’s a goodprice but you may have to pay more to get it. Keeping in mind it’s at auction and there WILL be other bidders.




.

Jacob Vealetzek 07-20-2022 07:06 PM

Got er for 1200!

Austin J Hawthorne Jr. 07-20-2022 07:20 PM

Good for you Jacob but just one word of advice. After your gunsmith confirms the guns shootability use only light loads. The early parkers had non-radiused breech faces and have been known to crack occasionally. Don't be to concerned though...I've had three of them over the years and put several hundred rounds through each of them without any issues.

Jacob Vealetzek 07-20-2022 07:29 PM

Sounds good that’s good info to have. Do you buy loads for them or load your own?

Arthur Shaffer 07-21-2022 01:05 AM

Jakob

You likely have done this, but I checked the serial number and factory record check. Your gun was made, it looks like, in early 1878 and there are existing factory records for it. You can apply for a Research Letter and find the relevent data available. This often allows you to see if it matches the way it left the factory and helps with its valuation.

If you go on and actually join, you will save more than the membership cost on the first letter, and get access to the member section with buy and sell ads for guns, parts and memorabilia, along with a lot of other interesting forums with a bunch of info.

Austin J Hawthorne Jr. 07-21-2022 09:14 AM

I was using RST's early on but started loading my own to save a few bucks. Components are getting hard to find now and RST is also having problems finding components. Hopefully this situation will eventually pass.

Jacob Vealetzek 07-22-2022 09:22 PM

So what is the best way to clean these old Damascus guns like this to keep them in great condition?

charlie cleveland 07-23-2022 01:02 PM

some good gun oil and wipe it down regularly and clean the bores....some wood polish on the stock and forearm and do this on a schedule not hard keeping a gun clean....charlie

Jacob Vealetzek 07-23-2022 07:45 PM

So just dropped it off at the gunsmith and he was very suprised at the condition of the bores! Said it probably looked the same when it was brand new. Said it’s it really good shape. Just gonna give the once over then gotta get some shells and give it a try at the range.

Mike Franzen 07-24-2022 09:23 PM

Congratulations Jacob on a good buy. I also have a grade 2 lifter made in 1878. Yours has some some extra engraving on the breech balls. Let us know what the gun smith says.


All times are GMT -4. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org