Parker Gun Collectors Association Forums
Page 18 of 35 « First 814151617 18 1920212228 Last »
Show 40 post(s) from this thread on one page

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Restoration (https://parkerguns.org/forums/forumdisplay.php?f=8)
-   -   The Lost and Found List (https://parkerguns.org/forums/showthread.php?t=7958)

George M. Purtill 08-01-2015 07:42 AM
Quote:
Originally Posted by Bill Murphy (Post 173877)
There are still a bunch of posts on this thread that either have serial numbers with commas, or serial numbers with punctuation marks adjacent to the numbers. The SEARCH function will not work for people wishing to connect with you. The number should be separate from all other characters, like 200000 .
Perhaps the moderator would let you or me correct them?

Dean Romig 08-01-2015 12:35 PM
George, I think that is a great idea. I hope it somehow comes to fruition.

Jeff Davison 08-04-2015 09:33 PM
228908
 
I have the original stock it's uncut, has the original skeleton steel butt plate. Stock was broken and repaired at the wrist. Great piece of wood if you have the gun, I'm sure this can be restored. According to the book it's from a DHE with factory single trigger.

Daryl Corona 10-25-2015 04:57 PM
30" Titanic barrels
 
Talk about a DUH! moment, I pulled out a DHE 12 that was in the back of the safe to make room for the guns I just cleaned from a recent hunting trip. Well to my surprise I noticed that the forend lug and forend iron were both stamped with a 2. Hmmm.... went to my letter from 2007 and the gun left the factory with 30" barrels, so the current barrels which are 28" must have been added later. Never noticed this in the 10 or so years I've had this gun, no mention of them in the letter.

So I'm looking for 30" barrels and forend for 198638.

Thanks for looking.

FRANK HALSEY 10-29-2015 12:22 PM
I am looking for a 2nd set of barrels for my gun. The number is 26101 thanks, frank

David Noble 10-29-2015 12:32 PM
28" 20ga damascus barrels
 
I am desperately looking for a set of 20ga 28 inch damascus barrels, "0" frame with ejectors. I would love to find the originals, serial number 84040 but any other 20ga 28" damascus "0" frame set will work even if extractor.
Thanks, David

Al Limone 12-14-2015 07:05 AM
74474 I have set number 2 ph 26 inch barrels. Looking for barrels and forearm from set number 1.
Thanks Al

Eric Eis 12-14-2015 08:09 AM
16 gauge O frame damascus barrels
 
Please someone out there must have a set of 30' 16 gauge O frame Damascus barrels, the gun is an ejector gun but I'll take a extractor set. My gun started life as a 16 ga on an O frame and was sent back to Remington to be fitted with 20 and 28 ga fluid steel barrels, I think Remington destroyed the 16 ga barrels:banghead: Eric

Dean Romig 12-14-2015 08:23 AM
Quote:
Originally Posted by Eric Eis (Post 183285)
I think Remington destroyed the 16 ga barrels:banghead: Eric


Most likely Remington, Lefever, and any other business that replaced Damascus barrels with fluid steel barrels destroyed or scrapped the originals.... They were Dangerous!!






.

Mills Morrison 01-12-2016 04:49 PM
Looking for a friend. 16 gauge VH (I think) Parker 225314


All times are GMT -4. The time now is 05:59 AM.
Page 18 of 35 « First 814151617 18 1920212228 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org