Log in

View Full Version : Pre 74 10 gauge? No S/N


Chuck Elliott
12-12-2012, 09:14 AM
i inherited my Grandfather' s 10 gauge has a 44 & a 2 on the water board with a Laminated barrel. Rare? Value? Can I shoot modern ammo? Should I pay to restore it? Barrels each has an 11, a diamond with 10G & T .
Great site, thanks in advance
Chuck

Gary Carmichael Sr
12-12-2012, 09:21 AM
What's the serial number?

Chuck Elliott
12-12-2012, 09:38 AM
44 is stamped on the center of the frame/(waterboard), then a 2. thats it. Low number?

Rick Losey
12-12-2012, 09:56 AM
could you please post better pictures including the sides of the action and the barrel flats and rib markings?

does it say Parker Brothers?

Chuck Elliott
12-12-2012, 09:56 AM
Pic? ( having issues loading them...)

Chuck Elliott
12-12-2012, 09:58 AM
Another

Chuck Elliott
12-12-2012, 09:59 AM
Another

Chuck Elliott
12-12-2012, 10:02 AM
More...

Chuck Elliott
12-12-2012, 10:05 AM
For some reason I can only load one at a time...

Chuck Elliott
12-12-2012, 10:06 AM
Pic

Rick Losey
12-12-2012, 10:08 AM
as I expected - British proofs

I am afraid this is not a Parker Brothers shotgun, there was a Parker in Birmingham that made shotguns from te muzzleloading to the early breechloader era.

the engraving looks interesting, depending on condition it may have modest value. If its a family piece, I would display it with pride

Chuck Elliott
12-12-2012, 10:10 AM
One more

Chuck Elliott
12-12-2012, 10:11 AM
See

Chuck Elliott
12-12-2012, 10:12 AM
Side

Chuck Elliott
12-12-2012, 10:14 AM
Last

Chuck Elliott
12-12-2012, 10:15 AM
12334

Chuck Elliott
12-12-2012, 10:21 AM
as I expected - British proofs

I am afraid this is not a Parker Brothers shotgun, there was a Parker in Birmingham that made shotguns from te muzzleloading to the early breechloader era.

the engraving looks interesting, depending on condition it may have modest value. If its a family piece, I would display it with pride


So Rick, check out the rest of the photos; this is British? 32" laminated barrel, Parker on the side, same hammers etc.. couldn't this be a very early Connecticut gun?

Rick Losey
12-12-2012, 10:34 AM
yes -its a British gun, absolutely not a Parker Brothers gun.

take a look here for a twin

http://parkerguns.org/forums/showthread.php?t=8749&highlight=birmingham

Dennis V. Nix
12-12-2012, 11:51 AM
Chuck, forgive my meddling but you will get more acceptable photos if you turn off your flash. Most cameras these don't really need the flash if you have a little bit of room light and set the ISO for 200. You might also consider taking the gun outside but not where the sun is too bright. I have been chastized by some members in the past for my photo suggestions but if you want us to see what you are photographing these suggestions might help.

Respectfully submitted,
Dennis

Chuck Elliott
12-12-2012, 12:38 PM
Anyone have info of these British guns? Values, ages, etc, links?

Rick Losey
12-12-2012, 01:21 PM
age - i would say roughly 1870's maybe 1880's

value is minimumal, even though it was fairly well made, its also been well used, i would guess that the many many Birmingham makers turned out these guns for export by the tens of thousands.

You may get more information on doublegunshop.com, but most folks are going to mistake it for one of the poorer quality Belgium knockoffs which are just if nptmore as common.

if you made me guess i would etimate the cash value at a few hundred at best. They have some limited value as a shooter depending on the condion of the barrels and no real collector value.

Bill Zachow
12-12-2012, 08:13 PM
From the pictures, I would hazard a guess that your gun is not a Parker Bros. made in Meriden, Conn.