Parker Bros. Laminated Barrels

[Dean Romig]

This is a recently aquired Parker Underlifter with what are believed to be Laminated Steel barrels manufactured by Parker Bros.
There is no proof of this hypothesis, however it is plain to see that the barrel tubes are each comprised of three seperate sections 'hammer welded' together. The patterns are not as nice as those shown by Bruce Day in a recent thread but appear more interesting in pattern than the English Laminated barrels used on later, lower grade Parkers.
The gun shown here is the $125 Grade (predecessor to the Grade 3) and the stock is wonderful in my opinion but is broken at the wrist and the checkering has been poorly recut. Notice also that the hammers are wrong and this is the gun I need hammers for.

These issues will be remedied in the coming months.



.

[Rick Losey]

Dean -

is it just the "patina", the photo, or are the patterns on the tubes showing quite a bit of difference?

[Dean Romig]

Stock and Frame.

**** Apologies, incidentally, to the "Gold Towel Collector" that all I could find on short notice was a gold towel****


.

[Dean Romig]

Dean -

is it just the "patina", the photo, or are the patterns on the tubes showing quite a bit of difference?


Yes Rick. I explained that in my description of the barrels - they were made in segments and welded together to make the necessary tube length. This was a short-lived experiment by Parker Bros to manufacture their own barrels. I think the 'appearance of the barrels' was probably secondary to producing a functioning, quality set of barrels.

[Drew Hause]

The pattern is quite similar to Austin's Grade 3 SN 14056

http://pic20.picturetrail.com:80/VOL1373/6511424/17227428/387027190.jpg

More information here
http://parkerguns.org/forums/showthread.php?p=7342#post7342

and http://parkerguns.org/forums/showthread.php?t=5520

[Dean Romig]

Very interesting Drew.

[Daryl Corona]

Really nice stick of wood, great looking barrels and beautiful receiver. Towel is first rate too. Was towel redone by Turnbull?:)

[Dean Romig]

The towel is completely original and was found in a closet in a small town in Massachusetts. Just goes to show ya, they're still out there!

[George M. Purtill]

Very cool pattern on the barrels whatever the heck they are.
I stocked up on towels at the Quality Inn in Georgetown but all they had was white.

[Chuck Bishop]

Maybe the PGCA should add the yellow/golden towel to the Parker Store as an item to sell:rolleyes: Add a PGCA logo and it would be a big seller. Better check though, it may be patiented by someone in the Mid West.

Dean, is that stock original?

[calvin humburg]

Very cool gun Dean! I really like the design on the side of the breech balls. Not to be calumniatory but how about some outdoor photos. Wood is meritorious.

[Dean Romig]

Yes Chuck, the stock is original to the gun. It has the fluting I am so fond of at the 'nose of the comb'. Another stock you might look at for comparison is Robin's 16 ga. (Grade 5) which I believe is also a Dollar Grade Parker.

[Bill Murphy]

Dean, what is the source of the hammers that are on the gun? Do they work OK?

[Bruce Day]

Thanks to Dean for showing guns. And George, even a white towel with Holiday Inn logo will form a good backdrop.

Dave Mills has the only other gun with what are believed to be Parker made barrels that I have seen.

[Dean Romig]

Bill, the hammers are an unmatched set from the very lowest grade. They function properly but they need desperately to be replaced.

[edgarspencer]

The towel is completely original and was found in a closet in a small town in Massachusetts. Just goes to show ya, they're still out there!
Poseur

[Dean Romig]

You found me out Eggar.

[edgarspencer]

and just when I thought I was Tegger. You trying to confuse me?