10 Gauge

[Andrew Kreps]

I was given a 1905 Parker 10 Gauge shotgun by my late uncle. I don't know much about it and was hoping someone here would be able to tell me more about it. Any information would be great (model, condition, value, etc).

[Phil Yearout]

Nice Uncle!

[Michael Moffa]

Supply the serial number and a plethora of info will be incoming. Just looking at the pics that might be 4 frame 10 or a 3 frame 12 (breech barrel wall thickness), DH grade from the engraving and long barrels (32's-34's) unless the stock is really short. Nice piece of wood for the stock. Engraving also looks like 1890's mfg and damascus tubes lean that way also.

All the above is most likely gibberish to you but the web-site will explain all of it.

Spin

[Andrew Kreps]

Serial number is 133917

[Pete Lester]

Serial number is 133917

Thats a very nice gun. The Serialization Book says it is a Grade 3 (D grade) 10ga Damascus 28" barrels (28 is uncommon in 10ga) Capped Pistol Grip.

How do the bores look?

[Andrew Kreps]

Bores look very clean. I know my uncle never fired it, but it looks like whoever owned it before him didn't use it much, if at all. I did confirm that the barrels are 28".

[Pete Lester]

Bores look very clean. I know my uncle never fired it, but it looks like whoever owned it before him didn't use it much, if at all. I did confirm that the barrels are 28".

On the surface it appears to be in very good shape, screws have been turned and may be in the wrong holes as they are not indexed. Frame size on 10ga guns is something people would want to know. It stamped on the bottom of the barrel lug nearest the breech. Could be 2, 3, 4 or 5. You have to take the barrels off the gun to see it.

[Andrew Kreps]

On the surface it appears to be in very good shape, screws have been turned and may be in the wrong holes as they are not indexed. Frame size on 10ga guns is something people would want to know. It stamped on the bottom of the barrel lug nearest the breech. Could be 2, 3, 4 or 5. You have to take the barrels off the gun to see it.

I'm afraid I'll screw something up if I try to take the barrels off. Last thing I want to do is ruin a beautiful shotgun. I'll see if I can find a local gunsmith that knows what they're doing. Thank you so much for the info!

[Pete Lester]

I'm afraid I'll screw something up if I try to take the barrels off. Last thing I want to do is ruin a beautiful shotgun. I'll see if I can find a local gunsmith that knows what they're doing. Thank you so much for the info!

Understood, always best to play it safe. Do you have a scale, how much does it weigh?

[Andrew Kreps]

Understood, always best to play it safe. Do you have a scale, how much does it weigh?

My only scale is my bathroom scale. According to it, it weighs 9.2 lbs. I don't fully trust that number, but it should be in the ballpark.

[Pete Lester]

My only scale is my bathroom scale. According to it, it weighs 9.2 lbs. I don't fully trust that number, but it should be in the ballpark.

Check your private messages, I sent a little more info on your gun.

[Dean H Hanson]

WOW!!!!!

[Bill Murphy]

Andrew, where do you live? You are better to have one of our members take your gun apart rather than a local gunsmith. Many local gunsmiths do not know which end the shot comes out, and may damage your gun.

[Andrew Kreps]

Andrew, where do you live? You are better to have one of our members take your gun apart rather than a local gunsmith. Many local gunsmiths do not know which end the shot comes out, and may damage your gun.

I'm in the Cleveland, OH area.

[Dean Romig]

Kenny Graft is in Ohio.... Does he work on guns? I know he has a gun shop.





.

[CraigThompson]

Supply the serial number and a plethora of info will be incoming. Just looking at the pics that might be 4 frame 10 .
Spin

I’m pretty sure there were no hammerless 4 frames .

[CraigThompson]

Thats a very nice gun. The Serialization Book says it is a Grade 3 (D grade) 10ga Damascus 28" barrels (28 is uncommon in 10ga) Capped Pistol Grip.

How do the bores look?

Hmmmm a 28” DH 10 would be nice to go along with my pair of EH 28” 10’s .:whistle: Oh yeah I keep forgetting I’m in sell mode .

[Garry L Gordon]

Steve Parker is also in the “neighborhood,” Canton/Akron area if I recall correctly.

[Andrew Kreps]

Thank you all for the information, this has been tremendously helpful!

[Bill Murphy]

I'm sure the gun is a #3 frame from the thickness of the barrels at the breech, and the weight. I have never seen a #4 frame hammerless gun and a #2 frame 10 has thinner barrel walls at the breech.

[CraigThompson]

I'm sure the gun is a #3 frame from the thickness of the barrels at the breech, and the weight. I have never seen a #4 frame hammerless gun and a #2 frame 10 has thinner barrel walls at the breech.

You may very well be correct on frame size , however both of my 28” EH guns appear about that thick at the breech and both are on #2 frames .

[Bill Murphy]

Thanks, Craig.