Parker Ejector System

[joe breda]

As many of you probably already know, I manufacture Parker ejector hammers.
With that said, I made a test fixture to test the sear engagements, main sear and the secondary sear. I’m going to try and post a video of the test fixture and you’ll actually be able to see whats going on inside the forearm metal because you sure as hell can’t see it when it’s all assembled !
Hopefully you’ll find it interesting?

[joe breda]

I don’t think the video posted, so here are a few stills.
1st one is the sear plate one the secondary sear.
2nd picture it’s on the main sear.
I sure wish the video had posted !
I think it was in the wrong format. .MOV ?

[Dean Romig]

I know I'll find it very interesting.





.

[Gary Laudermilch]

This I want to see.

[Mike Franzen]

I don’t think you can post videos to this forum. However you can post links to videos posted to platforms like you tube. So you might want to go that route.

[Phillip Carr]

For those that may have a broken or missing ejector hammer Joe is the go to guy. I needed a right ejector hammer and the one Joe supplied was perfect.
Went right in with no fitting and worked flawlessly.

[joe breda]

Here’s a link to the video I mentioned above. Way better than the still pictures !
Please someone let me know if it plays and make sure to turn on the sound and turn it up !
https://youtube.com/shorts/gHzzk2664sM?feature=share

[Robert Brooks]

Thanks Joe. Bobby

[Phillip Carr]

Joe I was able open the video link and it does play the audio. Thanks for the posting.

[joe breda]

Thank you Phil for letting me know it worked for you.
Much Appreciated, and hope your well.