PDA

View Full Version : 16 GAUGE

chris dawe
02-14-2011, 04:41 PM
Do anyone of you fella's have a set of decent fluid steel 16 gauge #1 frame barrel's ? are you willing to sell ?

Thank's for your time
Dean Romig
02-14-2011, 04:58 PM
Do you need an original set or will Galazan's be OK?
chris dawe
02-14-2011, 05:20 PM
I was hoping for a "fixer upper" set ....money is scarce with two small one's;),and I don't mind doing the work polishing ,relaying rib's and blueing....but in the mean time what are a set of Mr.Galazan's going for ?

Thank's so much for your time ,
Chris
Dean Romig
02-14-2011, 08:07 PM
As I recall, they were something like $1800 plus fitting.
Mike Poindexter
02-19-2011, 09:07 PM
Chris: You can get an entire gun with fixer-upper barrels for less than a new set of Galazan"s or Simmons. Check it out.

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=216185905
chris dawe
02-20-2011, 01:31 PM
Thank's for the info ! ,but for now I still have to hold out for something cheaper.

All the best
Chris
Dean Romig
02-20-2011, 05:36 PM
Chris, you may wait years to find something cheaper. If you were to buy a complete gun such as the example shown by "Limapapa" you could sell the remaining parts thereby reducing your cost for the barrels.
Bill Anderson
02-20-2011, 09:10 PM
Chris: You can get an entire gun with fixer-upper barrels for less than a new set of Galazan"s or Simmons. Check it out.

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=216185905

You are not looking past the current bid. The reserve is at least $3000 on this VHE.

Bill
Jim DiSpagno
06-02-2011, 12:02 PM
Chris, pm me I've got a lead on gunbroker item #233500343
Beltway Gun & Pawn has the gun for $500.00 no bids so call and see if they will sel the gun outright for that $$$+ S/H 1-701 847-4181 Sell off the rest of the parts sans the reciever on ebay and make back 1/2 your cost.. Jim
Bill Murphy
06-02-2011, 05:50 PM
Do you want ejector or extractor barrels??
Bill Murphy
06-02-2011, 05:54 PM
Unfortunately, the GB gun has unacceptable barrels. Everything else probably works.
chris dawe
06-02-2011, 06:50 PM
Thank-you fella's for all the help in this matter,unfortunately I'm not interested in bringing a full gun into Canada,it's just too tangley for me right now...if someone had bought a part's gun and was interested in parting out the barrel's that would be easier for me as barrel's are apparently no trouble to ship.

they would have to be fluid steel , 16 bore, #1 frame, extractor's

You guy's are a credit ,all the best

Chris