New to me Remington 32

[bob weeman]

Been looking for an affordable Remington 32 and it arrived today. A three digit serial number TC with 32 inch barrels. Took it out and shot it today. I really like how it fit and shot. It did double on me twice though. Any tips on adjusting it? Does probably need a good cleaning. The safety is locked in the forward position. I do not know much about these single triggers and am not sure if it is an original Remington trigger or not. Do lighter loads reduce the doubling or does that not matter? It will be a fun gun even if it does double from time to time.

[Eric Estes]

A good strip and clean would be the first step IMO.

[Dave Noreen]

It appears to me that is a Miller single trigger.

When the Model 32 was introduced, it was only offered with double triggers. A gun with a three-digit serial number was probably built before Remington perfected their single selective trigger. August 12, 1933, Remington Arms Co., Inc. illustrated price list --

103476

By March 1934, Remington was offering their single selective trigger --

103477

[CraigThompson]

If I’m not mistaken you got that gun off Gunbroker . I was watching it and forgot to bid LOL’s . I e owned a pair of Remington 32’s and never had the doubling issue also had a pair of K-32’s also no doubling issue . The Remington 32’s safeties functioned and I never made an attempt to lock them down . Both the K-32’s I had came with a set screw in the frame you could tighten and lock the safety off . Never paid attention whether Remington 32’s had that feature but it certainly wouldn’t have been hard to install .

[bob weeman]

Thanks for the info. From pictures of other Miller triggers I did think it looked like a Miller. It does not have "Miller" on the trigger like I saw in some pictures so I was not sure. I wish it did have the double triggers but I like this one just fine too. It was from Gunbroker and I was glad to get it. I have tried on others but they always went out of my price range. I will be figuring out how to properly strip and clean it next. Any other tips on these great guns would be greatly appreciated....thanks again!

[John Davis]

You can pick up a reprint of the original owners manual on eBay. They are very helpful. Only a few were made with double triggers in the beginning and many of those were sent back to Remington for a single trigger replacement.

[Dave Noreen]

Here is a nice double trigger at Cabelas --

https://www.gunsinternational.com/guns-for-sale-online/shotguns/remington-shotguns-o/u/remington-model-32-f-grade-12-gauge.cfm?gun_id=101835670

[CraigThompson]

Here is a nice double trigger at Cabelas --

https://www.gunsinternational.com/guns-for-sale-online/shotguns/remington-shotguns-o/u/remington-model-32-f-grade-12-gauge.cfm?gun_id=101835670

Nice price as well :whistle:

[bob weeman]

Don't get much nicer than that one!

[Dean Romig]

Here is a nice double trigger at Cabelas --

https://www.gunsinternational.com/guns-for-sale-online/shotguns/remington-shotguns-o/u/remington-model-32-f-grade-12-gauge.cfm?gun_id=101835670


What a gorgeous gun!
If I needed (wanted) a 32 that price wouldn't scare me off.





.

[Dave Noreen]

Cabelas Fort Worth seems to have taken in a collection of Remington F Premier Grades. A couple of Model 11 12-gauges, and a 20-gauge, a Model 17 and another Model 32 all recently listed on GI.

[bob weeman]

I do not know single triggers very well and am not sure if this is a Miller or not?? I also hear you can adjust the safety and I would like to get this one working again. Is that done with the slotted screw in the frame just below the safety? Any tips would be greatly appreciated...could not seem to find anything on line except that it can be done....

[Dave Noreen]

Here is the diagrams from the 1940 Remington Parts Catalog --

103608

I'd suspect that if the safety slide is now the barrel selector for the Miller trigger the Safety Adjusting Screws may no longer be functional.

[Bill Murphy]

The Miller Trigger Company claims to be able to fix Miller and any other triggers. Give them a shot.

[Arthur Shaffer]

What a gorgeous gun!
If I needed (wanted) a 32 that price wouldn't scare me off.





.

What was the price? The discussion here must have gotten someone excited. The gun is marked SOLD now.

[Dean Romig]

As I recall it was close to $10k.





.

[Bill Murphy]

Probably an original F Grade with a nice restock and the dreaded 26" barrels. Almost ten grand?

[Jeff Christie]

My REM 32 is a 4 barrel skeet set. Simmons 20,28,.410 barrels. It was my mother’s skeet gun. Its safety is locked off. Great set.