Organized Chaos!

[Mike Koneski]

I was looking at the reloading cabinet Dale posted. Very nice and way more organized than my laboratory!! :rotf: Figured I’d post some pics of where Dr. Evil concocts his creations. I do not have photos of my component storage, that is a Freedom Bunker State Secret!! :cool:

[Chuck Bishop]

Looks like you've cleaned up since the last time I was up there!

[charlie cleveland]

wow what a nice cluttered up shop....mines that cluttered but aint as big as yours....you win .....charlie

[Daryl Corona]

You're a man after my own heart.:bowdown:

[Mike Koneski]

From 10 down through .410 plus black powder paper and brass hulls. Throw in a myriad of metallic cartridge and there’s plenty to do. I avoid the loft when it’s too hot but cooler temps and I’m all over it. :)

Just started using the Spolar again after a 12 + year hiatus. Even had it set up for the shells I want to make now. 12g 7/8oz with 16g Clays for 1160 FPS. Also have top plates for 20, 28 & .410 if I want production numbers. I spoke with Spolar last week and they may be able to set me up with a top plate for 12g that'll load 2 1/2" shells. If they can do that I may inquire about a 16g 2 1/2" top plate too.

[Mike Koneski]

Daryl, I got the hull bin idea from Mike Smith. Thought he had a great set-up.

[Dean Romig]

In the immortal words of Frank Barone...... Holy Crap!! :shock:





.

[Mike Koneski]

But the important thing is I do know where everything belongs!

[CraigThompson]

But the important thing is I do know where everything belongs!

Yeah yeah yeah ! If I’d stop buying stuff and get control of the wave so to speak I could get organized again as well at home . Now I keep three or four shotgun loaders at the shop which can change depending on the day . I keep an old Lyman press bolted on my desk there for rifle rounds so for that all I need to do is bring the box of brass a box of projectiles powder and a few primers . For deer rifles I usually don’t load a specific load in amounts greater than ten I may however load five different loads for a specific rifle and use one after the other as I kill deer wanting to try different projectiles in said rifle .

[Mills Morrison]

Way ahead of me.

[Stan Hoover]

Mike,

where's the gold colored shot shell reloader, I thought I might get a glimpse of it? Or is that the loader with the cover on it?

Stan Hoover

[Craig Larter]

My mom an artist lived by "yea can't be creative without making a mess!" Mike your reloading shop follows that wisdom.

[Daryl Corona]

[QUOTE=Craig Larter;342564]My mom an artist lived by "yea can't be creative without making a mess!"

If that holds true Craig then I would be classified as a "creative genius".:whistle::)

There are photos of Einstein's desk after his death and it looks like someone just dumped a box of papers on it.

[keavin nelson]

Well, I am working on acquiring MEC press #3, so I have a bit to catch up, WOW! Now with the law of averages, I would guess at least 50#s of powder and, oh 250# of shot stashed somewhere??!!!!!

[Dean Romig]

Well, I am working on acquiring MEC press #3, so I have a bit to catch up, WOW! Now with the law of averages, I would guess at least 50#s of powder and, oh 250# of shot stashed somewhere??!!!!!


:biglaugh: :rotf:





.

[Mike Koneski]

Mike,

where's the gold colored shot shell reloader, I thought I might get a glimpse of it? Or is that the loader with the cover on it?

Stan Hoover

That's under the black press cover. :)

[Mike Koneski]

Well, I am working on acquiring MEC press #3, so I have a bit to catch up, WOW! Now with the law of averages, I would guess at least 50#s of powder and, oh 250# of shot stashed somewhere??!!!!!


Your estimates are WAY LOW!!! :rotf: Don't forget various wads and an ample supply of primers (no, none for sale!!).

[Mike Koneski]

Here ya go Stan!

[Stan Hoover]

Nice Mike,
I'm still dreaming, one of these days when I win big money @ Rock Mountain :rolleyes:
Stan Hoover

PS, I'm disappointed, where's the hydraulic system?

[Mike Koneski]

No need for hydraulics. By myself I can easily do 800+ shells per hour. If someone sets the wad in the guide we've done 1000/hour. That was back when I used to shoot registered and needed a lot of shells for practice.

[Milt Fitterman]

You need a chair with wheels!

[CraigThompson]

Mikey that Spolar is sporty looking and I've heard theyre top of the line !

But if I ever upgraded from the Rube Goldberg MEC's I'd have to go back to PW's . I'm sure there are more changes than I see but the basic design is the same or so it appears to me . Then again a new Spolar is about double the cost of a comperable PW unit .

I'm with you on the hydraulic aspect of loading plus I don't want the likely chance of hydraulic lines leaking in my shop or basement or wherever I might have the unit set up .

[CraigThompson]

From 10 down through .410 plus black powder paper and brass hulls. Throw in a myriad of metallic cartridge and there’s plenty to do. I avoid the loft when it’s too hot but cooler temps and I’m all over it. :)

Just started using the Spolar again after a 12 + year hiatus. Even had it set up for the shells I want to make now. 12g 7/8oz with 16g Clays for 1160 FPS. Also have top plates for 20, 28 & .410 if I want production numbers. I spoke with Spolar last week and they may be able to set me up with a top plate for 12g that'll load 2 1/2" shells. If they can do that I may inquire about a 16g 2 1/2" top plate too.

A dearly departed friend at his demise had a PW 800 Plus with heads for 12-16-20-28 and 410 . Two bolts out the top and change all the sizing dies and you were pretty much done . I always found it quite comforting to walk in my loading room when I had PW's bolted on the bench for all four skeet gauges , kinda like to do that again but the ends a hell of a lot closer than the end LOL's !

You need the same thing I really need , a PW LS-1000 setup at the factory for 10 gauge 2 7/8" :cool:

[Stan Hoover]

I currently use a PW for 12, 20, 28, and 410, and I'm waiting on 16 gauge dies.

it is easy to switch gauges and I like it allot. I of course have a Mec setup for 10 gauge 2 7/8 and also a Mec for 8 gauge.

I would still like to try a Spolar, am I wrong in thinking the Spolar would be the Cadillac of shot shell reloaders Mike?

Stan Hoover

[Chuck Bishop]

Here you go Stan, Spolar hydraulic with dies for 12,20,and 28ga. I don't care what reloader you have, they all have their pluses and minuses. I can take off a 12ga. die for example, put it back on a year later and nothing will have to be adjusted and it will make a perfect shell. In the picture when the shell is ejected out the back, there is a large hole in the bench top and the shell goes into the drawer. Your welcome to stop in when your in the Harrisburg area and see it in action.

[Stan Hoover]

Chuck,
That is beautiful, well thought out.

We need a green emoji, to signify jealousy :)

I will have to take you up on that offer sometime,

Thanks,
Stan Hoover

[keavin nelson]

Your estimates are WAY LOW!!! :rotf: Don't forget various wads and an ample supply of primers (no, none for sale!!).

What, your mother didn't teach you to share!!!!

[CraigThompson]

Here you go Stan, Spolar hydraulic with dies for 12,20,and 28ga. I don't care what reloader you have, they all have their pluses and minuses. I can take off a 12ga. die for example, put it back on a year later and nothing will have to be adjusted and it will make a perfect shell. In the picture when the shell is ejected out the back, there is a large hole in the bench top and the shell goes into the drawer. Your welcome to stop in when your in the Harrisburg area and see it in action.

I’d heard about your setup from a mutual friend :cool: And I still think you need K-20 410 barrels and a Spolar 410 head :whistle:

[Chuck Bishop]

I'll have to find an extra $4.5k laying around that I don't need and that ain't going to happen!

[Mike Koneski]

I currently use a PW for 12, 20, 28, and 410, and I'm waiting on 16 gauge dies.

it is easy to switch gauges and I like it allot. I of course have a Mec setup for 10 gauge 2 7/8 and also a Mec for 8 gauge.

I would still like to try a Spolar, am I wrong in thinking the Spolar would be the Cadillac of shot shell reloaders Mike?

Stan Hoover

Stan, there are some good presses out there and then there are some GREAT presses out there. Spolar is top of the line. Maybe 5 minutes to change gauges too. I didn’t use it for over 10 years and all I did was schmutz it up and it runs like it did way back when. Nothing wrong with my MEC machines. They do their jobs well too.

[Mike Koneski]

What, your mother didn't teach you to share!!!!

Not a chance!! :rotf::rotf:

[CraigThompson]

I'll have to find an extra $4.5k laying around that I don't need and that ain't going to happen!

We had a local gun club member/friend come in last week after he’d sold off a portion of his H&K collection . He got me to call Rudy Etchen’s and get him a nice new K-80 I forget which engraving pattern but it cost him $18,000 . For just a 30” separated barrel gun . I still have the barrels to send to Briley for extending the chambers and a full set of skeet tubes once they’re operational again .

[john pulis]

Wow. That Spolar sure is nice. Looks like a finely tuned race car.