PDA

View Full Version : Finally found a Philly Fox I like


edgarspencer
08-24-2020, 06:28 PM
Well, maybe not the first

kirbylawson
08-24-2020, 06:38 PM
If anyone has spares.........
I need shells for the three toy guns I have accumulated.
-KL

Daryl Corona
08-24-2020, 07:27 PM
Nice Edgar. I hope you will post this on the Fox board.

John Davis
08-24-2020, 09:15 PM
That's pretty cool.

Harold Lee Pickens
08-24-2020, 10:16 PM
Hey Edgar, what is it choked?

Bill Jolliff
08-24-2020, 11:26 PM
Hey Edgar, now you have to find the rest of the stuff.

https://i.imgur.com/TsfVJ2V.jpg

https://i.imgur.com/YViIebc.jpg

https://i.imgur.com/X7n2SXp.jpg

Dean Romig
08-25-2020, 07:03 AM
It appears to be an early “pin” gun.





.

edgarspencer
08-25-2020, 03:03 PM
Hey Edgar, now you have to find the rest of the stuff.

https://i.imgur.com/TsfVJ2V.jpg

https://i.imgur.com/YViIebc.jpg

https://i.imgur.com/X7n2SXp.jpg

It belongs to a friend. I didn’t go over to the dark side.

Daryl Corona
08-25-2020, 03:44 PM
It belongs to a friend. I didn’t go over to the dark side.

Trust me on this one my friend the dark side doesn't start with the initials A.H. but the intials L.C. come to mind.:eek:

Rick Losey
08-25-2020, 04:02 PM
Hey Edgar, now you have to find the rest of the stuff.



then a matched pair and a loader :rolleyes:

Dave Noreen
08-25-2020, 04:45 PM
I need shells for the three toy guns I have accumulated.

The shells are harder to come by than the guns themselves. I'm fortunate that my three had the shells with them.

There are several variations of the Fox Play Gun. Most have a top-lever, but some just have a stud for a barrel lug that engages a spring clip in the receiver. Top-lever above, spring clip stud below --

87634

Some have a fixed hinge-pin and some have a spring-loaded hinge-pin which allows the gun to be taken down. The lower gun is a Fox Products Co. and it has the spring-loaded hinge-pin --

87635

Now just need a leg-of-mutton case for one.

These A.H. Fox Gun Co. ads both show the top-lever --

87632

87633

Dave Noreen
08-25-2020, 05:28 PM
I should make a nice gun rack for them. I made that gun rack as a kid and it was above the head of my bed with my Super-Fox, Meat-in-the-Pot, and my sporterized 03-A3, through my high-school and college years. After I retired and moved here I narrowed it for the Fox Play Guns.

edgarspencer
08-25-2020, 05:31 PM
Trust me on this one my friend the dark side doesn't start with the initials A.H. but the intials L.C. come to mind.:eek:

Don’t let my serious demeanor fool you, Daryl. I was only joking.....a little.....kinda.

Daryl Corona
08-25-2020, 05:57 PM
Don’t let my serious demeanor fool you, Daryl. I was only joking.....a little.....kinda.

Me too..... kinda.... sorta.:whistle:

Garry L Gordon
08-27-2020, 06:29 AM
So the questions now: should the barrels be re-blued, the chambers lengthened, the stock refinished?? (And what about the chokes?!?):shock::bigbye:

charlie cleveland
08-27-2020, 05:26 PM
I say leave the chokes alone and bore the chambers out to 3 1/2 inches....duck gun supreme...I once could have bought 2 daisey double barrel shotguns and the gun rack from daisey ....thought the price was high at 350 dollars....looking back I should have bought them.....charlie

wayne goerres
08-28-2020, 01:08 PM
If only they could talk.

edgarspencer
08-28-2020, 01:14 PM
If only they could talk.

:eek:I would freak out if a toy gun started talking to me.

wayne goerres
08-29-2020, 08:31 PM
May not be an intelligent conversation. Might start out something like this. 60 yeare ago I shot out Edgers eye.