View Full Version : Anyone using Blue Dot
allen newell
06-11-2020, 04:56 PM
Anyone using Blue Dot for 20 ga 7/8 oz loads?
Frank Cronin
06-11-2020, 09:16 PM
Have you checked the Alliant reloader's website?
There are better choices. I've used 20/28, Hodgdon International, 800x (great ballistics but PIA with inconsistent drops. I use a RCBS powder measure)
allen newell
06-12-2020, 03:29 PM
Blue dot was the only powder I could find locally. I'm loading 7/8 oz shot, 21 grams of powder, Winchester 209 primer. just have loaded one box that I'll shot at the club on Sunday. We'll see
Daniel Carter
06-12-2020, 04:24 PM
Allen, unless you have found a published load for this please hold off shooting those until you find some thing that will let you know pressure for this. Blue dot is in my experience a heavy load or steel shot application and i will look through my books to see if that is a good application.
Daniel Carter
06-12-2020, 04:40 PM
All i can find is a 1 oz. load that uses 21 grains and pressure is in the 10 thou. range.
Try Heritage in Warwick Ri they are very well stocked.
allen newell
06-12-2020, 05:12 PM
Dan, that is basically the recipe i am following except loading 7/8 oz not 1 oz. I have plenty of loading tables from the various powder mfgrs
Daniel Carter
06-12-2020, 06:54 PM
Allen, sorry i got a little carried away.
Bill Murphy
06-20-2020, 06:48 AM
The reduction of shot load in a published recipe should bring that load down into a pleasant 8000 to 9000 psi range. By the way, they are "grains", not "grams". Good luck.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.