What on earth would you use a 10 gauge with cylinder barrels for?

[Bill Holcombe]

I own one 10 gauge parker(actually its a 10/12 but regardless) that I have been known to use on Duck and even occassionally on Dove.

However, I have recently encountered a gun that is cylinder and cylinder in both barrels. Barrels have definitely been cut but they have been refinished well and overall the gun is in good condition and the price reflects the cut barrels.

I like the look of the gun and the heft and balance of the gun isn't noticeably off.....I just don't know what in God's name I would use it to shoot??

[CraigThompson]

Skeet , dove , quail , buckshot , possibly slugs and last but not least AIR :rotf: I have a 28” EH that left the factory cylinder and very very light modified and letters as such . I have an Grade 1 top lever with 26” factory original barrels that are pretty much the same . Picture below is of my EH 28” after slaying that doe with my home concocted 0000 buckshot at about 22-23 yards .

[CraigThompson]

What is the gun a top lever or a hammerless ?

[Bill Holcombe]

Hammerless.

[CraigThompson]

Hammerless.

If you decide against I might be intrested :cool:

[Mills Morrison]

Guarding the stagecoach comes to mind. Actually, you probably would be surprised how well it would still reach out there

[CraigThompson]

Guarding the stagecoach comes to mind. Actually, you probably would be surprised how well it would still reach out there

I have a damascus GH 16 on a 1 frame that’s had an inch or so removed . And that one with me steering it breaks in the mid 90’s at skeet . And I dare say the ones that go unscathed are certainly not the fault of the gun but rather the one steering !

[Bruce Day]

I have a CH 2 frame with original set 10 ga 26” and 12ga 30”. The 10’s are factory cyl and cyl. It makes a fine moderate range pheasant gun with 1 1/4 oz 5 shot. Shot cups keep the shot together.

[Craig Budgeon]

Turkey,you don't have to carry it all day.

[Dave Noreen]

I use Gauge-Mates and shoot Skeet with mine.

78064

[Richard Flanders]

The answer is obvious.....:p

[Bill Murphy]

Richard, was it a biggun?

[Richard Flanders]

I only shoot down the bigguns that are a clear and present danger Bill!

[Bill Holcombe]

Well I bought it. Won't get a chance to mess with it for a couple of weeks. It may be a bit of a project in the long term but we shall see when she gets here.

Added plus, it's got a dog on the floor plate.

[CraigThompson]

Well I bought it.

Added plus, it's got a dog on the floor plate.

Is it a DH or higher if ya don't mind saying ?

[Bill Holcombe]

Sorry, it's a DH.

[CraigThompson]

Sorry, it's a DH.

You know I’ve got three DH 10’s and I don’t remmember if any of them have a pooch on the floor plate :eek:

[Jerry VanHorn]

You can always get a job on a stagecoach !