Phew!

[John Dallas]

My arm's in a sling, and I'm researching if there is a water-cooled option for my PW800 Plus. 40 boxes of Sporting Clays loads over the three days.

1 oz 7 1/2. 16 gr 700X

[Dean Romig]

Nice work - don't stop now, Ripley's is looking for a new record!





.

[charlie cleveland]

that machine must have been red hot....charlie

[Chuck Bishop]

Were you doing all this with one arm? Must have taken quite a bit of time.

[John Dallas]

Fortunately, I still have 'em both. Right hand pulls the handle, the left hand sets the empty hull and then the wad

[Buddy Harrison]

I'm impressed. Can you provide the pressure, hull, velocity, primer info? Thanks.

[CraigThompson]

Back a number of years ago I had four of the 800C loaders bolted on my bench and usually I load for a weekend skeet shoot on Thursday or Friday night . Usually that entailed four hundred 20’s , 150 28’s and 150 410’s . I will say I was a lot more motivated then ! I could usually load the 700 or so in about three hours .

[John Dallas]

Buddy- My computer has crashed. Will get you the data as soon as I get it sorted

[Harry Collins]

Craig, my attention span is about 100 shells on a MEC Grabber. Thats about 10 minutes worth once set up.

[John Dallas]

Buddy - Back home with a repaired computer.
Win AA 12 Ga. hulls
Win 209 Primers
IMR 700X 16 gr.
1 oz 7 1/2 lead

Data sheet shows 8000 PSI, 1125 fps.

Hope this helps

[Buddy Harrison]

Thanks for the info. I really appreciate it. Buddy

[CraigThompson]

Craig, my attention span is about 100 shells on a MEC Grabber. Thats about 10 minutes worth once set up.

Back then my time was limited but I wanted to hit a registered skeet shoot almost every weekend for three months . So generally I never had the shells loaded until the night before .