AyA?

[Dave Erickson]

Any happy AyA owners? I hope I'm not permanently banned from here, but I recently picked up a lightly used 16 ga. AyA #2. It seems to fit me well and it has 30" barrels choked 9 & 27.

https://imagizer.imageshack.com/v2/1024x768q90/924/Ii4Jde.jpg (https://imageshack.com/i/poIi4Jdej)
https://imagizer.imageshack.com/v2/1024x768q90/922/uMq6IN.jpg (https://imageshack.com/i/pmuMq6INj)

[Dean Romig]

They are a well made shotgun, and not too bad on the eyes either.





.

[Dave Erickson]

Thanks, Dean. I haven't owned a Spanish shotgun for 15-20 years. I've always wanted one of these. I blame McIntosh.

[Daniel G Rainey]

My first double was a 28 ga Ugardtechea ( Spanish gun ) double triggers 27 inch barrels, English stock killed lots and lots of doves, wild pheasant. Then I tried a Winchester 23. Next was an RBL 20 it killed lots of birds. It is a great gun. Thank the Lord son loves it. It is called my mistake gun besides upgraded wood I ordered a single trigger and a beavertail. Then I picked up Parker and it was like I had died and gone to heaven,

[Rich Anderson]

They are nice guns especially for the money. I think the older guns are a little nicer as far as finish goes but thats just my opinion. I passed on a used but well maintained #1 years ago in 20ga that I shouldn't have. A friend has a beautiful one in 28 with 30 inch barrels. You'll like the gun I'm sure.

[Randy G Roberts]

Sweet. What does it weigh ?

[Kirk Potter]

Project Upland did a video on AYA a while back:

https://youtu.be/ehXemjkWpvs

[Dean Romig]

AJ and I were talking a couple of weeks ago about the AyA shotguns. He went to Barcelona to tour the plant and to interview them. He has a tremendous respect for them.





.

[Dave Erickson]

Sweet. What does it weigh ?

It's just a touch under 6 lbs. 7 oz. with a 15" stock to a checkered butt. I got lucky on the fit, and I really can't make a case for adjusting the chokes. At this point with the long barrels I see it as more of a field gun vs grouser, but who knows.

https://imagizer.imageshack.com/v2/1024x768q90/922/0nDB2Z.jpg (https://imageshack.com/i/pm0nDB2Zj)

[Rich Anderson]

Nice video Kirk thanks for posting it.

[Dave Erickson]

I owned this Ugartechea 20 ga. exactly 20 years ago. It was my first and only sidelock and it was a Ruffed Grouse Society gun. Neat little 26" gun with gold-washed locks, and an ugly RGS medallion in the stock. I took the first two grouse I shot at with it on a hunt in, ironically, a RGS management unit in west central WI.

It was a memorable hunt. On the first bird my dog went on point at the edge of a wet drainage. I was looking at him from the hill above, and it was one of those loose points with not a lot of ground cover right there where he was. I finally started looking in the trees and there was a grouse at eye level with me. The second my eyes locked on the bird he flushed and made his break to get across the couple hundred yards of wet drainage. As he flushed 6 deer bolted and were bounding in the same direction as the bird. Talk about distractions! I scratched down the bird and on we went. The 2nd bird was a hard point in an impossible tangle. I could hear the old Sonic "air raid" tone in there and I knew I had very little chance of getting the bird, but I started busting my way in. The bird flushed and came right at me and passed about two feet over my head. I pivoted and took him going away. Quite a start for the little Ugie! I then went on to miss the next 8 in a row on the next couple hunts. :)

https://imagizer.imageshack.com/v2/1024x768q90/921/2cDXTF.jpg (https://imageshack.com/i/pl2cDXTFj)

[Bill Murphy]

I spent more than a decade tramping around the marshes with an AYA Matador ten gauge lightweight with case hardened receiver. My present AYA is a #2 .410 with 28" barrels and tight chokes. They are both wonderful guns, but the ten is out of my life.

[Rich Anderson]

In todays market place if someone was looking for a small bore in either 28 or 410 I'd advise looking into the Spanish guns. I don't recall the name but one of the older Spanish makers recently went out of business.

I seriously considered AYA and Garbi when looking for my 410 as a Parker was unobtainable but lucked into a CSM Fox FE.

[todd allen]

I first learned of AYA from reading Jack O Connor back in my youth. Never owned one, but they appear to be very nice, high grade Spaniards.

[Jack Kuzepski]

I think Ugartachea went out of business in the last 2 years.

Jack K

[King Brown]

I owned couple Matadors in 12 and 20, serviceable but little hard on triggers. Anyone looking for an AyA should have a look at the AyA history and of Spanish guns generally because there was a period when AyA quality wasn't as good as it had been.

[Garry L Gordon]

I have two #2s (a 28 & 16 gauge), two 4/53s (both 28s), and one of the Bournbrooks (a 16 proofed to handle steel shot). All of them have been reliable, and I've never had any issues with any of them. Two were custom stocked to my measurements, but all of them have good shooting dimensions and handle any reasonable loads I put in them.

[Patrick Anthony]

Congrats Dave on a nice looking AyA. I enjoyed hunting with an AyA #2 for many years back in the late 90's. Good guns for the money. Hope you have a great season with the new addition.

[Tom Jay]

I own a 16ga IC/M 26" box lock AYA Matador II from the 70's. It's my el cheapo gun for bad weather, throw a gun in the back of the truck and dog training shotgun. It's well balance, though just a tad heavy, and indestructible. Had a local smith refinish the stock and clean it up and its ready for another 50 years of use.

[Rodney Stumpf]

I have an AyA No. 2 in 20 gauge IC and Mod. Love it and fits me great.

[Mark Ray]

I first learned of AYA from reading Jack O Connor back in my youth. Never owned one, but they appear to be very nice, high grade Spaniards.

All good, and I have owned a number of spanish small bores. That being said, parts for many makes are obsolete, especially strikers. Kirk Merrington and I just went through re-creating strikers for a very high grade Zabala, side lock 28 bore, and it finally started scratching the $800 mark to remove, make and replace firing pins.

[davidboyles]

Several years ago I had a great source for new Grullas. I picked up a 410,28, and 16 all with 29" bbls and straight stocked. . Full round action side locks with Purdey engraving and killer wood. Don't ask me why but I traded them for a CSMC 28 ga Model 21 that weighed a ton and after trying for several seasons I let it go and started looking for a 28 ga Parker which THE Parker Gods found for me!!! I must admit the 16 was my favorite Grulla. One season shot a bunch of Teal with it in early season. Gun People are funny why they get the notion to do certain things!!!