20ga. 2.5" 1oz. wads Question

[Matt Valinsky]

Got a bunch of AAHS 20ga. hulls I want to cut down to 2.5". Would like some input on wads for a straight walled hull good for a 1oz. load and where to get them. Thanks

[John Campbell]

Go here. Browse around.

https://www.ballisticproducts.com/default.asp

[Rich Anderson]

The winchester HS hull uses a specific wad for that hull and I don't know if cutting it from 2 3/4 to 2 1/2 would change that. I use the Galandi wad in my 2 1/2 20's. Why do you want to put 1oz of shot in a 20??

[Matt Valinsky]

Actually Rich, I don't. I've been using either 3/4 or 7/8oz in my 20's. I do use 1oz. in the 12ga. These AAHS hulls are straight walled but the same wad works for both the HS and the CF. These HS 20ga are so darn inconsistent when it comes to length they are a pain to reload so decided to cut em down.

[Rich Anderson]

I never cared for the HS hull. I got a bunch in 28 and bought the HS wads but when an estate sale came up with a bunch of the older AA 28's I grabbed every one of them. I use the RST hull in 2 1/2 inch for all other gauges.