Trigger finish

[Gary Bodrato]

Gentlemen,
I have recently purchased a Remington era (1939) VHE. As the single trigger selector was stuck, it is now disassembled on my bench. Before reassembly, I would like to make sure the finish on the selector switch and trigger are correct for this guns era. I have found nothing in my Parker Story volumes nor the internet addressing trigger finish. Would appreciate help on this matter, Thank You

[Jean Swanson]

Just guessing, but would say they were nickel plated---harden silver.

Maybe Edger can comment on this.

Allan

[edgarspencer]

I'm. Certainly no authority on Remington era guns, but I rather suspect all but AAH and A1S were nickel plated.

[Jean Swanson]

I just checked a few of my VH's, GH's, PH's, and a DH---I will stick with my original post of nickel plated. As Edger stated ,the higher grades at times had gold plated triggers/trigger, but not always. There were those that did not like gold on guns. As a kid, my mentor Louis C. Goland, would let me shoot his 12 bore 2" Purdey that had the word SAFTY inlaid in gold---wow, that was something !!!

Allan

[Brian Dudley]

Where is all this High grade talk coming from? The original post was asking about a V grade.

Nitre Blued.

[Jean Swanson]

Brian

I personally checked a few of my lower grade guns to see how the triggers were finished & I stated I was sticking with my original post----just through in a few words about gold in guns.

I have never seen an original V grade trigger with nitrate bluing, trigger guards--yes.
Allan

[edgarspencer]

Where is all this High grade talk coming from? The original post was asking about a V grade.

Nitre Blued.
Perhaps the original post was a question about his VHE, But "..all this High grade talk..." Really, I don't think there was 'High grade talk" Excuse us if we offended you.
I'm. Certainly no authority on Remington era guns, but I rather suspect all but AAH and A1S were nickel plated.
I said "...all but..." that excludes them high grades.
Brian

I personally checked a few of my lower grade guns to see how the triggers were finished & I stated I was sticking with my original post----just through in a few words about gold in guns.

I have never seen an original V grade trigger with nitrate bluing, trigger guards--yes.
Allan
Allan, perhaps you'll remember the New, Unfired VH I sold on this board a few years ago, to Josh Lowensteiner? It had zero handling, in addition to no firing, and, it had nickel plated triggers.

[Brian Dudley]

From a late 1920's VHE.

57188

[Eric Eis]

Allan, I think the original post was about the selector not the finish of the triggers (which you would be right the triggers were plated and Brian is right on the selector being blued). I'm not sure what the poster is asking about. Eric

[Brian Dudley]

Maybe there are a few examples out there of low grade guns with Nickel triggers, but in my experience, every one that I have seen from Trojan up through G grade had Nitre Blued triggers as well. However, most that I have seen are DT guns.

[Reggie Bishop]

I just saw pics of 3 VH Parkers that are in an album here. A 20, 28 and 16 gauge. All 3 had the blue triggers that Brian is talking about. I have also just purchased a VH 28 that also appears to have Nitre blued triggers.

[Gary Bodrato]

I did in fact ask about both the trigger and barrel selector switch, I am sorry for any confusion in my wording of the original post. Brian's photo does show the blueing on the trigger behind the blade itself and a blue selector. I am not surprised about the selector being blued, but thought Allan was right on the nickel finish trigger, as I have never seen a blued blade.Having looked through hundreds of photos on the internet prior to posting, with out question most seemed of a plated or polished finish, and selector switches were about 50/50. Brian's photo is convincing and so is Edgar's statement as he owned a new in the box VH. As this is a Remington era VHE I do not know if they would have spent the time and effort to Nickel plate triggers while bluing selector switches. I believe Brian has the answer here. Allan, Edgar, Brian, and Reggie I thank you all for your knowledgeable responses.

[edgarspencer]

A DHE 20, and a VHE 20. There is no evidence, that I am able to see, of nitre blueing.

[Jerry Harlow]

With no dog in the fight, I do believe it may be in The Parker Story, or maybe I read it somewhere else, that all of the lower grades did have Nitre Blued triggers (and trigger guards on all grades). The Nitre Bluing wears pretty quickly, and a single trigger would get used twice as much. Thus the raw steel trigger looks like bright steel, which does look like nickel.

I nitre blue all of my triggers on lower grade guns I rework. I will look for the information. I remember reading they would also set the triggers on a red hot file pulled out of the coals and blue them that way also. I don't think I dreamed it so I will look for the info.

[Gary Bodrato]

Thank you Edgar, and Jerry, looks like maybe a wait and see is in order. I do have The Parker Story, and went to that as my first point of reference but did not find an answer. May have not looked in the right places. Help is much appreciated

[Brian Dudley]

A DHE 20, and a VHE 20. There is no evidence, that I am able to see, of nitre blueing.



Well, yes. D grades would be nickeled. Again... the subject gun here is a V grade.

[Jean Swanson]

I have a question---who is to say that a gunsmith ,not knowing the way the trigger and selector were finished at the Parker factory, in fact niter blued both.

Just a though that could be the answer. I have handled hundreds of Parkers and honestly really never focused on the way triggers are finished, other than gold on high grade guns.

[Gary Bodrato]

This is true Allen, some 75 years after production stopped a multitude of refinished Parkers are still serviceable but incorrect in one way or another. And a point a Buddy brought up, if Remington was anything like Winchester, towards the end of a series they built what was referred to as "parts clean up guns" high serial number guns usually, that have hammers from a first run gun trigger from a second and maybe barrel from a different model altogether. The problem I have here is this trigger exhibits zero finish anyware. So I guess it could go nitre or nickel..Thanks Again for all the help