Ithaca Lewis 20 Gauge

[Kirk Potter]

Was in my local gun shop today browsing what few used SXS they had and spotted a Ithaca Lewis 20 gauge. 26" beautiful Damascus barrels, looked uncut.. Advertised "DO NOT SHOOT" as all the Damascus guns there are, safety inoperable.. Overall looked pretty nice, they want $700. Anyone have any experience with one of these?

[charlie cleveland]

sounds like a good buy to me ive always wanted a small bore ithaca but im always broke when one turns up...you want find a cheaper one no where...charlie

[Dennis Yager]

Stock is broke but repaired crack is in the checkering.

[Harold Lee Pickens]

What grade was it?
I have a grade 3 Lewis in 12 ga, and it is a beautiful gun

[Dean Romig]

Are the barrels Chain Damascus?





.

[Jeff Christie]

A friend of mine has several Ithaca Lewis 12s. He likes them a lot.

[Kirk Potter]

What grade was it?
I have a grade 3 Lewis in 12 ga, and it is a beautiful gun

Advertised as a grade 2.

http://shop.williamsgunsight.com/pic/USED-ITHACA-LEWIS-20GA--SALE-081705/ximg.axd?cGF0aD0vcHJvZGltYWdlcy8wODE3MDUuanBnJmxvY 2F0aW9uPW5ldCZjb250ZW50dHlwZT1pbWFnZS9qcGcmd2lkdGg 9MCZoZWlnaHQ9NTAw

[wayne goerres]

I would have a hard time walking away from that. That repair can be repaired if it bothers you.

[Dean Romig]

Is it in original condition or has it been refinished?




.

[Mark Landskov]

http://vicknairgunsmithing.blogspot.com/2016/11/wr-pape-8-ga-hammergun.html

Here is a page from Dewey Vicknair's web log. He repaired a stock that had been 'repaired' in the past. It can be done. Good Luck!

[Kirk Potter]

Is it in original condition or has it been refinished?




.

I'm no expert at spotting this stuff, but IMO it looks like the forend has been redone, the finish was quite a bit shiner and newer looking than the stock. Receiver and barrels both look original to me.

Gun is advertised as having NO SAFETY, but the safety is there and slides back and forth, but apparently does nothing.

[Dean Romig]

The middle position should be 'safe' while pushing it forward or backward from the safe position will determine which barrel fires first.





.

[Stephen Hodges]

If that is a double trigger gun the Ithaca three position safety works like this. In the "center" position the gun is on "safe". In the forward position the gun will "fire" and the safety will return to the middle or "safe" position when you open and cock it. If the safety is put in the rear position and fired the "automatic safety", that is the safety returning to the middle position is disabled and it stays off "safe" when cocked and will fire until you manually put the safety in the middle position again.

[Dean Romig]

http://vicknairgunsmithing.blogspot.com/2016/11/wr-pape-8-ga-hammergun.html

Here is a page from Dewey Vicknair's web log. He repaired a stock that had been 'repaired' in the past. It can be done. Good Luck!

Very nicely done. - That's exactly how David Trevallion repaired Charlie Herzog's "Chicken Coop Gun", a very pretty Grade 3 Parker featured in the Spring 2016 Issue of Parker Pages.





.

[Kirk Potter]

If that is a double trigger gun the Ithaca three position safety works like this. In the "center" position the gun is on "safe". In the forward position the gun will "fire" and the safety will return to the middle or "safe" position when you open and cock it. If the safety is put in the rear position and fired the "automatic safety", that is the safety returning to the middle position is disabled and it stays off "safe" when cocked and will fire until you manually put the safety in the middle position again.

Possible that they just don't know how it works then.

[Stephen Hodges]

My 1912 Flues 16 gauge has this three position safety. Perhaps this safety has been disabled.

[Harold Lee Pickens]

I dont believe my grade 3 Lewis 12 ga has a 3 posistion safety, but will check it out tonight--I tend not to like 3 posistion safetys--mine has chain link damascus

[John Eurom]

Kirk PM sent.