HELP ! Need a part

[Mike McClure]

Seems that while cleaning up this old gun (1885 12ga. s/n 46650) I found an old repair to the right hammer shaft. While reassembling the receiver I cocked the hammer to reinsert the firing pin and broke the old repair to the hammer shaft.

As you can see by the pictures the right hammer is a bit different from the left side so it has been repaired before.

Does anyone have a part that would work to replace the broken shaft and maybe a hammer that would match the left side??

[Brian Dudley]

Your tumbler is broken. That is what the hammer attaches to. And your hammer on that side is not correct either.
If you want to contact me, i can at least help with the tumbler. Maybe the hammer too.

[Paweł Janusz]

Seems that while cleaning up this old gun (1885 12ga. s/n 46650) I found an old repair to the right hammer shaft. While reassembling the receiver I cocked the hammer to reinsert the firing pin and broke the old repair to the hammer shaft.

As you can see by the pictures the right hammer is a bit different from the left side so it has been repaired before.

Does anyone have a part that would work to replace the broken shaft and maybe a hammer that would match the left side??

I make parts to work and match, harden, fit, make sure they function properly, be happy to help
Paweł Janusz

[Mike McClure]

I make parts to work and match, harden, fit, make sure they function properly, be happy to help
Paweł Janusz
Found a used part, thanks for the offer